KitchenAid KFGD500ESS Installation Instructions Manual page 14

9. Turn the Number 0.070 Natural gas orifice hood
counterclockwise to remove.
A
A. Number 0.070 Natural gas orifice hood
10. Install the Number 0.044 LP gas orifice hood, turning it
clockwise 4 or 5 turns. Do not overtighten.
A
.044
A. Number 0.044 LP gas orifice hood
11. Position the oven bake burner over the orifice hood and
reinstall using screw.
B
A
C
A. Bake burner orifice hood
B. Oven bake burner
C. Oven bake burner screw
To Convert Upper Oven Bake Burner
12. Repeat previous steps 1 through 8 for conversion of the
upper oven bake burner.
13. Remove the Number 0.055 Natural gas orifice spud in the
upper oven and replace with a Number 0.037 LP gas orifice
spud.
14. Reverse steps to reinstall the orifice covers, oven bake
burners, oven baffles and oven bake covers in both ovens.
14
To Convert Oven Broil Burner (Nat. gas to LP)
1. Remove broil burner screw and set aside.
2. Remove the broil burner from the broil burner orifice hood.
The broil burner will hang in the back of the oven while
changing the orifice hood.
B
A. Broil burner screw
B. Broil burner orifice hood
3. Turn the Number 0.054 Natural gas broil burner orifice hood
counterclockwise to remove.
A. Number 0.054 Natural gas broil burner orifice hood
4. Install the green Number 0.037 LP gas broil burner orifice
hood, turning it clockwise 4 or 5 turns. Do not overtighten.
A. Number 0.037 LP gas broil burner orifice hood
5. Place the broil burner on the broil burner orifice hood. Insert
the broil burner locator pin in the hole in the oven back.
A
A
.037