Lennox MS8 SERIES Installation And Service Procedures page 91

OUTDOOR UNIT DIS-ASSEMBLY
Step
1. Remove the top cover and front-side plates.
A * Remove the screws that secure the top panel to
unit.
* Remove top panel.
B * Remove the screws that secure the valve cover to
the unit.
* Remove valve cover.
C * Remove the screws securing the front-side panel
to chassis.
* Remove the front-side panel.
2. Remove exhaust grille
* Removes screws securing the exhaust grille to the
unit.
* Remove grille.
Outdoor Unit Procedure
FRONT-SIDE PLATE
EXHAUST GRILLE
Page 91
TOP PANEL
VALVE
COVER
Corp. 1244-L9