Lennox MS8 SERIES Installation And Service Procedures page 30

Hide thumbs Also See for MS8 SERIES:
Table of Contents

Advertisement

Wireless Remote Functions (Continued)
TIMER ON button
Use the TIMER ON button to ini­
tiate or cancel a single timed-on
event. Use this feature to bring
the system on just before you re­
turn home or just before you
wake in the morning.
Press the TIMER ON button
once. The clock icon
disappears and a time setting ap­
pears with the word ON flashing
at the right. Use the - and + keys
to adjust the time setting to the
desired time for the system to
begin operation. Press the TIM­
ER ON button again to
accept the setting. When suc­
cessfully set, the word ON will
appear to the right of the current
time display. Press the TIMER
ON button again if you want to
cancel the timed-on event.
TIMER OFF button
Use the TIMER OFF button to
initiate or cancel a single timed-
off event. Use this feature to turn
the system off just after you
leave the house or just after you
go to bed at night.
Use the same method
described above to set the de­
sired time for the system to stop
operation. When successfully
set, the word OFF will appear to
the right of the current time dis­
play. Press the TIMER OFF but­
ton again if you want to cancel
the timed-off event.
MS8C / MS8H (208-230V)
Page 30
REMOTE LOCK
Press - and + buttons simulta­
neously to either lock or unlock
the remote control buttons. When
locked, the
icon is
displayed.
TEMP button
Use the TEMP button to change
the temperature display shown
on the remote control. When ini­
tially powered on, the current
temperature setting is displayed,
along with the
icon.
Press the TEMP button once
to alter the display to show the
current indoor ambient tempera­
ture, along with the
icon. The
indoor temperature sensor is in
the indoor unit.
Press the TEMP button again to
display the outdoor ambient tem­
perature
icon. The outdoor
ambient temperature display is
not available on this system.
On occasion, the remote control
will display the temperature that
was not selected (indoor ambient
temperature or setting tempera­
ture). The selected temperature
will return to the display screen
after 5 seconds.
NOTE - The TEMP button can
also be used to temporarily dis­
play the indoor ambient tempera­
ture on the indoor unit display
panel.
LIGHT button
Use the LIGHT button to turn the
indoor unit display light on and
off. When the light is on, the
icon appears on the remote con­
trol.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ms8cMs8h

Table of Contents