Required Tools And Supplies - Lennox MS8 SERIES Installation And Service Procedures

Required Tools and Supplies

INSTALLATION TOOLS
Tool Picture
SUPPLIES
The following field-provided supplies may be required for installation
* Line set (see table 9 for requirements)
* Foam insulation (line set and condensate line)
* UV rated protective tape (used to maintain positioning of bundle). Bundle consists of line set, condensate line and wiring
between indoor and outdoor units.
* UV rated cable ties
* Outdoor unit pad
* Outdoor disconnect switch (indoor unit disconnect switch may be required by local code)
* Cable (4-conductor). All need to be rated either 208-240V and sized per NEC).
NOTE — Stranded wire must be used to connect the outdoor unit to the indoor unit. The stranded wire is necessary to ensure
proper system communication and operation.
* Plastic wall screw anchors
* Exterior wall channel (optional)
* Wall sleeve or PVC tubing material to field fabricate a wall sleeve for line set, condensate line and wiring (utility bundle).
Tool Name
Screw driver
Electric drill
Measuring tape and
knife
Hole core drill
Adjustable wrench
A 5/16" female flare to
1/4" male flare adapter
(order Lennox catalog
number Y0576)
Tool Picture
500
Page 3
Tool Name
Multimeter
Allen wrench set
(metric)
Flaring tool and pipe
cutter
Refrigerant leak detector
or a bottle of soapy water
Level
Micron gauge
Corp. 1244-L9