LG GD1329CGS Owner's Manual page 20

Part 5 PROGRAMMING MODE -
3 3 - - 3 3
Top off apply or not setup
Entering set up mode.
You will see LqC1
2 0
Press the WHITES & COLORS button.
Press the PERM. PRESS or the DELICATES
button until appears in the display.
Press the START button.
Press the PERM. PRESS or the DELICATES
button until appears in the display.
Press the START button.
Display
.
Press the PERM. PRESS or the DELICATES
button until appears in the display.
Press the START button.
Press PERM. PRESS or DELICATES button and then
select or
Disable
Enable
Press the START button.
The machine sets up the Vend type, then advances to the
next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• Stack type - 1. Control panel open.
2. Turn on/off toggle switch.
Setup Mode
Button
.
Display
One or the other will
display.