Tape Player; Troubleshooting Tips - RCA RCD103 User Manual

Tape Player

Playing a tape
EN
1. Select TAPE from the SOURCE selector.
2. Press STOP/EJ. to open the tape deck door.
3. Insert a tape into the door and push the
door closed.
4. Press REW or F.FWD. to wind the tape to the
desired starting position. Press STOP/EJ. to
stop winding.
5. Press PLAY to start playback, PAUSE to pause
playback (release the button to resume
playback) and STOP/EJ. to stop playback.
Recording to tape
From radio
1. Insert a tape into the deck.
2. Select RADIO from the SOURCE selector.
3. Press BAND to access the desired radio band.
4. Tune to the station to be recorded.

Troubleshooting Tips

Problem
System doesn't turn on
No sound
Poor radio reception
CD doesn't play
CD sound skips
Remote control doesn't
work (RCD104 / RCD105
only)
6
Solution
• Unplug the unit for a moment, and then plug it back in.
• Check the outlet by plugging in another device
• Adjust volume setting.
• Make sure you've selected the correct function
• Make sure MUTE indicator is off
• Adjust the antenna for better reception
• Try turning off electrical appliances near the unit, such as hair dryers,
vacuum cleaners, or fluorescent lights
• Make sure you've put a CD in the tray
• Make sure the CD's label is facing up
• Try another CD
• Make sure that Pause mode is not activated
• Make sure CD function is selected
• Clean the CD (as explained in "More Information")
• Check CD for warping, scratches, or other damage
• Check for vibration or shock that may affect the unit; move the set if necessary.
• Make sure batteries are properly installed
• Replace all batteries as they may be dead
• Clear the obstacles or shorten the distance between the remote and the unit
5. Press RECORD to begin recording.
6. Press PAUSE or STOP to pause or stop
recording respectively.
From CD
1. Insert a tape into the deck.
2. Select CD from the SOURCE selector.
3. Insert the disc to be recorded.
4. Select the track or program to be recorded.
5. Press RECORD to begin recording.
6. Play the track or program to be recorded.
7. Press PAUSE or STOP to pause or stop
recording respectively.
Tip: For better recording quality, use normal
bias tape (Type I) only.