LE CACHE Contemporary 1400 Owner's Manual page 15

L E C A C H E P R E M I U M W I N E C A B I N E T S
For European Country wine cabinets, the crown and base moldings are shipped in a
separate box. For Mission wine cabinets, the crown molding is shipped in a separate box.
To assemble the moldings, do the following:
-
Adjust the leveling feet below the cabinet until the doors are aligned
-
Place the base molding (3-sided) on
the floor in front of the cabinet
-
Align the sides of the base molding
with the tracks on the bottom of the
wine cabinet, and gently slide the
molding back until it comes to a
stop.
o It may be necessary to tilt up
the front of the wine cabinet
in order to install the base
molding..
o If the base molding won't
slide into place, you may
need
leveling
amount to raise the wine
cabinet while maintaining the
alignment of the doors.
-
Place the crown molding on top of
the wine cabinet.
should seat in the slots underneath
the molding.
-
Some wine cabinets come with screws (included in the envelope hanging inside the
wine cabinet) that can be used to attach the brackets on the crown molding to the
top of the cabinet.
UPRIGHT WINE CABINETS –
CROWN AND BASE MOLDINGS
to extend all the
feet an equal
The hinges
-14-