Related Manuals for Mellerware EVE STEAM IRON 23009
Summary of Contents for Mellerware EVE STEAM IRON 23009
- Page 1 C O N T E M P O R A R Y SABS IEC60355 12 0 0W PLEASE READ ALL INSTRUCTIONS BEFORE USE 2 y e a r g u a r a n t e e Model: 2 3 0 0 9...
-
Page 2: Important Safeguards
6. Steam button 7. Pilot light 8. Temperature control knob 9. Handle 10. Front cover 11. Back cover 12. Power supply cord IMPORTANT SAFEGUARDS 1. Please read all instructions carefully before using the appliance for the first time. 2. Before connecting the appliance, check if the voltage indicated on the rating label corresponds with the mains voltage in your home. 3. Do not use appliance for anything other than its intended use. 4. The iron should always be switched off before connecting or disconnecting from the power supply. Do not pull on the cord to disconnect the plug from the wall socket. 5. Do not use the iron when it is damaged in any way. Do not operate the iron with a damaged cord or plug. Do not replace the power cord or any other parts by yourself. Bring the iron to the nearest authorized service facility or to the shop where you bought it, as special tools are required for repair. 6. When you have finished ironing or when you only leave it for a short while, stand the iron upright and then disconnect the iron from the wall outlet. 7. Do not allow children to touch the iron or the power cord when ironing. 8. Do not immerse the iron or the cord into water or any other liquid. - Page 3 IRONING INSTRUCTIONS CHOICE OF WATER • This iron can be used with normal tap water. • If the water in your area is particularly hard, it is advisable to use distilled or de-mineralized water. • Do not use chemically de-scaled water or any other liquids for refilling. HOW TO FILL IN WATER • Unplug the iron from the wall outlet. • Press the steam control button (6) down, so that the steam won’t come out. • Fill in the water through the inlet. • Do not fill the water past the maximum level “MAX” of the water tank. This may cause your iron to leak. Important: Remove the water after use. TEMPERATURE CONTROL SETTING • Always check first to see whether a label with ironing instructions is attached to the article to be ironed.
- Page 4 Set the steam button/switch to on or full. Set temperature control dial to MAX or 3 dot position for steaming. If your iron is fitted with a self clean function carry out cleaning as per instructions. 27 Nourse P .O. Box 975...