Cooking Hob ELECTROGAS Index Italiano English Français Instructions for use Installation, 10 Use, 10 Maintenance, 10 Deutsch Español Nederlands Instructions for the installater Installation, 12 Gas connection, 12 Electrical connection, 12 Português User characteristics, 13 Assistance, 14 THIS APPLIANCE IS CONCEIVED FOR DZ 20 (IX)/HA DOMESTIC USE ONLY.
Instructions for use Installation All the operations concerned with the installation (electrical and gas connections, adaptation to type of gas, necessary adjustments, etc.) must be carried out by qualified technicians, in terms with the standards in force. For specific instructions, kindly read the part reserved for the installation technician.
Instructions for the installer Installation This appliance is not provided with a combu-stion product discharge. It is recommended that it be ISO 7/1 installed in sufficiently aerated places, in terms of the laws in force. The quantity of air which is necessary for ISO 228/1 (FR) combu-stion must not be below 2.0 m3/h for each kW of Fig.
To avoid all risk, if the power cable becomes damaged, it must only be replaced by the manufacturer, wok C3 only by an authorised service centre, or by a qualified electrician. Adaptation to various types of gas (Fig. 5) Should the appliance be pre-set for a different type of gas than that available, proceed as follows: •...
Assistance Before contacting After-Sales Service: 1. See if you can solve the problem yourself. 2. Switch the appliance on again to see if the problem has been solved. if it has not, disconnect the appliance from the power supply and wait for about an hour before switching on again.
Need help?
Do you have a question about the DZ 20 IX and is the answer not in the manual?
Questions and answers