GE JTP44 Use And Care Manual page 10

Do not lock the oven door with the latch during
baking. The latch is used for self-cleaning only.
NOTE: The oven has controls for the upper oven
and the lower oven. Be sure to set the correct
control. Pads on the left side of the panel are for
the upper oven. Pads on the right side of the panel
are for the lower oven. The TIMER ON/OFF,
COOK TIME, STOP TIME, INCREASE and
DECREASE pad can be used for either oven.
How to Set Your Oven for Baking
To avoid possible burns,
correct position before you turn the oven on.
u
BAKE
Press the INCREASE or DECREASE
2.
pad. The last oven set temperature
appears in the display. Continue
The oven will start automatically,
The word "ON" and "100°" will be
displayed. As the oven heats up, the
display w-ill show the changing
temperatures. When the oven reaches the
temperature you set a tone will sound.
10
the
place the shelves in
Your oven temperature is controlled very accurately
using an oven control system. It is recommended [ha[
time given on recipes as a guide to become familiar
with your new oven's performance. If yOLI think LU1
adjustment is necessary, see the Adjust the O\en
Thermostat section in this guide. It gives etisy ZJ()
instructions on how to tidjust the thermostat.
NOTE: When the oven is hot, the front of the oven
o
Press the CI..EAR/OFF pad when the
3.
CLEAR
OFF
NOTE: A fan may automatically turn on and off to
continue t(} run even after the oven is turned off.
To change the oven temperature during the
Bake cycle, press the BAKE pad and then
the INCREASE or DECREASE pad to get the
new temperature.
—