User Menu Mode - Kenwood TK-80 Service Manual

9. User Menu Mode

This mode enables users to select various settings to suit
their individual needs. The items that can be modified are
listed below:
Menu
00 VFO/M
01 Transmit power switching
02 NB ON/OFF
03 Display switching frequency/alphanumeric
04 LOCK OUT ON/OFF
05 Scan busy stop switching TO/CO/OFF
06 Selective call ON/OFF
07 ID (own unit) code display
08 Memory code A setting (call ID)
09 Memory code B setting (call ID)
10 Memory code C setting (call ID)
11 Memory code D setting (call ID)
12 Memory code A setting (character)
13 Memory code B setting (character)
14 Memory code C setting (character)
15 Memory code D setting (character)
REALIGNMENT
Content
9-1. Selecting settings
• Begin by pressing [MENU] to display the User menu.
• Press [MODE] or [DATA] to select the desired item num-
ber.
• Use [DIAL] to change the setting.
• Press [MENU] once more to complete the change.
Note:
• Menu numbers are designed to scroll in order continu-
ously.
• Menu items are designed to scroll in order continuously.
• Menu item number "00" can only be set when DIP SW3 is
set to ON.
• Menu item numbers 08 to 15 can only be set when the
user memory code setting in the Dealer menu mode is set
to ON.
• Menu item numbers 01 and 04 represent the channels
prior to entering the user menu mode.
• If a Selective call kit is not installed, setting item number 06
(user's own office code) to ON will only produce on the
display. The selective call mode will not be enabled.
• Switching the [MENU] key ON/OFF can be inhibited from
the Dealer menu mode.
TK-80
7