Reset Button - Sony CDX-M7810 Operating Instructions Manual

I
(front panel release) button 4
J SOURCE button
To power on/change the source (Radio/CD/
MD* 2 /AUX* 3 ).
K Number buttons
Radio:
To receive stored stations (press); store
stations (press and hold).
CD/MD* 2 :
(1): REP 8
(2): SHUF 8
(5): BBE MP* 2
4
To activate the BBE MP function, set "BBE
MP-on." To cancel, set "BBE MP-off."
(6): PAUSE*
4
To pause playback. To cancel, press again.
L RESET button 4
M AF (Alternative Frequencies)/TA
(Traffic Announcement) button 10
To set AF and TA/TP in RDS.
N Receptor
To receive signals from the card remote
commander or wireless rotary commander.
O IMAGE button 2
To select the display image.
Space Producer mode t Movie mode 1-2
t Spectrum analyzer mode 1-5 t Wall
paper mode 1-3 t normal play/reception
mode
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
qh SCRL (scroll) button 8
To scroll the display item.
qj DSPL (display)/PTY (Programme
Type) button 8, 10, 13
To change display items; to select PTY in
RDS.
qk EQ7 (equalizer) button
To select an equalizer type (Xplod, Vocal,
Club, Jazz, New Age, Rock, Custom or off).
ql </, (SEEK –/+) buttons
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
w; SOUND button 11
To select sound items.
wa VOL (volume) +/– button
To adjust volume.
ws OPEN/CLOSE button
To open/close the front panel.
wd DSO button 2
To select the DSO mode (1, 2, 3 or off). The
larger the number, the more enhanced the
effect.
wf LIST button 9, 14
To list up.
wg M/m (DISC +/–) buttons
To select preset stations/skip groups (press);
skip groups continuously (press and hold).
wh ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
*1 When a CD/MD changer is connected.
*2 When an MD changer is connected.
*3 When an optional Sony portable device is
connected.
*4 When playing back on this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
"Replacing the lithium battery of the card remote
commander" on page 16.
7