Quick Clean Mode; Fan Speed Button; Plasmacluster On/Off Button; Power On/Off Button - Sharp KC-860U Operating Instructions Manual

QUICK CLEAN MODE

QUICK CLEAN Mode with humidifi cation releases high-density Plasmacluster ions. By con-
tinuously discharging strong airfl ow cycles, the unit effectively removes airborne dust, pollen,
mold and allergens from the air as they are drawn through the fi lter system. Water must be in
the Water Tank when this mode is selected.
The unit humidifi es when there's water in the Water Tank, and it operates without humidifying
when there is no water in it.
1
Press the QUICK CLEAN MODE Button on
the display to select this mode.
When the operation fi nishes, the unit will return to the
prior operation.

FAN SPEED Button

Press the FAN SPEED Button to select the preferred fan settings.
Indicator lights will show the speed currently selected. Please note
the fan speed cannot be adjusted during the QUICK CLEAN Mode.
AUTO operation
The fan speed is automatically switched (HIGH*, MEDIUM, LOW) depending on
the amount of impurities in the air. The sensors detect the impurities for effi cient air
purifi cation.
POLLEN mode operation
MAX operation
MEDIUM operation
LOW operation
* HIGH fan speed is an intermediate speed between MEDIUM and MAX.

Plasmacluster ON/OFF Button

Press the Plasmacluster ON/OFF Button to turn Plasmaclus-
ter Ion Mode ON and OFF. When Plasmacluster is ON, both
the Indicator Light and Plasmacluster Indicator Light on the
front display turn on.
POWER OFF Button
Press the Power OFF Button to turn the unit off.
The unit will operate at High level for 10 minutes, then will
alternated between MED and HIGH every 20 minutes.
The unit will operate at maximun fan speed .
The unit will operate at medium fan speed .
The unit will operate quietly using minimal air intake.
E-13