Playback; Playing Back Recordings - Canon XC10 Quick Start Manual

4k
Hide thumbs Also See for XC10:
Table of Contents

Advertisement

Playback

Playback

Playing Back Recordings

1 While the camcorder is turned off, hold the
^ button pressed down.
• The camcorder will turn on and an index
screen will appear.
• If you hold the button pressed down again,
the camcorder will switch to
mode, depending on the position of the
movie/photo switch.
2 Touch the thumbnail of the desired recording to start playback.
• You can also use the joystick to select a recording.
• During playback, you can touch the screen or press the DISP. button to display the
playback controls. You can use the touch panel or joystick to operate the playback
controls.
Playing back clips
• Playback will start from the selected clip until the end of the last clip in the index screen.
• From the playback controls, touch [Ý] to pause playback or touch [Ñ] to stop playback
and return to the index screen.
Playing back photos
• After the photo appears, drag your finger left/right to browse through the photos one by
one.
• You can also use the joystick to browse through the photos.
• From the playback controls, touch [f] to return to the index screen.
NOTES
• You may notice brief stops in video or audio playback between clips.
32
or

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents