Manual - Electrolux 267200 Installation And Operator's Manual

GB

4.4 MANUAL

After SWITCHING THE OVEN ON the following MANUAL cooking
mode screen appears:
Drop-down "CONTROLS MENU":
Manual 
Programs
Automatic
Cleaning
Settings
Manual
Phase
1 of 1
50% 50%
48°
0:30
0:30
START
"DRAWER" drop-down menu
with Utilities in several items of the CONTROLS MENU
To set a cooking cycle, select the required CYCLE:
HOT AIR
COMBI
STEAM
and set:
- HUMIDITY (excluding STEAM cycle) (touch CYCLE button)
- TEMPERATURE (touch the bar
- TIME (touch the bar
or CORE PROBE (touch the bar
Cooking PHASES (1 of 1)
Set COMBI cycle
Cooking CYCLES
Set HUMIDITY
Set
TEMPERATURE
Current TIME
Set TIME
Start CYCLE
INFORMATION
AREA
(touch)
(touch)
(touch)
)
)
and then )
42
In this way a cooking Cycle is set, then just touch START to start
the Cycle.
After about 10 seconds the PREHEATING screen appears and
then the following Cooking in Progress screen:
Phase 2/3
Combi
160°
2:17
2:30
* In PROGRAMMED mode, the word "Combi" will be replaced by
the name of the Program or Recipe in progress (e.g. Chicken)
This fi gure (for information) shows nearly all the possible cases;
but only those concerned are
Touch this screen to return to the MANUAL control Settings.
Any setting already made can be modifi ed and the Cooking Cycle
can be stopped by touching STOP for a few seconds.
The SKIP COMPARTMENT PREHEATING function also appears
with the respective symbol
preheating for particular types of cooking.
STOP
The previous description regarded setting a cooking Cycle. Now,
this will enable setting others in a more complex way, by adding
the other functions made available.
Cooking PHASE (2 of 3)
COMBI cycle * in progress
HUMIDITY in progress
Set TEMPERATURE
TIME in progress
set TIME
HALF SPEED in progress
(example)
presented.
next to the STOP button, to skip