Turning The Bluetooth Audio Off (Routing The Audio From The Headset To Your Radio); Adjusting The Volume Of Your Radio From Bluetooth Audio Device; Clearing All Bluetooth Devices Information - Motorola APX 3000 User Manual


Turning the Bluetooth Audio Off (Routing the
Audio from the Headset to Your Radio)
Procedure:
With the external device Bluetooth turned ON.
1
Press the preprogrammed button to route the audio from the
headset to your radio.
2
The blue LED blinks momentarily short blinking blue. Your
radio sounds a short, medium-pitched tone. The display
shows SPKR ON.

Adjusting the Volume of Your Radio from
Bluetooth Audio Device
Procedure:
With the Bluetooth audio device connected to your radio:
1
Adjust volume up/down on the bluetooth audio device.
2
Your radio display shows VOL XX and sounds a short,
medium-pitched tone.


Clearing All Bluetooth Devices Information

1
Long press the preprogrammed Bluetooth On/Off button.
Your radio sounds a short, medium-pitched tone.
2
Your radio display shows PLS WAIT and the blue LED blinks
blue repeatedly to indicate clearing is in progress.
3
Your radio display shows ALL CLR to indicate clearing is
successful. The blue LED changes to blinking blue with
short interval.
OR
Your radio sounds a short, low-pitched tone. The display
shows CLR FAIL to indicate clearing has failed.
Note: If Re-Pair Timer is set to infinite and you clear keys on
your radio, you must clear keys on all previously paired
devices as well. (Please see your accessories manual
for further details.)
57
English