Please read and comply with Symbols in the operating Proper use these original instructions prior instructions to the initial operation of your appliance and Use this appliance only as directed in these store them for later use or subsequent own- Danger operating instructions.
Operating and Functional Elements Illustration of scrubbing vacuum 1 Parking brake 26 Push handle Operator console 2 Rotary handle to incline the vacuum bar 27 Lock of wastewater reservoir 3 Height adjustment of suction bar 28 Flexible lock of rinsing system (option) 4 Wing nuts for fastening the vacuum bar 29 Wastewater reservoir rinsing system (option)
Initial charge tips Program selection switch Before Startup With the initial charge, the control will not yet be able to detect which battery type has Installing the Brushes been installed. Keep charging the batteries BD model until the display shows a full charge (batter- ies may still not be completely charged).
Recommended detergents: Installing the Vacuum Bar Operation Application Detergent Insert the vacuum bar into the vacuum Danger Routine cleaning of all wa- RM 746 bar suspension in such a manner that In dangerous situations, release the drive ter resistant floors RM 780 the profiled sheet is positioned above lever.
Drain off the dirt water - regulate the Setting the Vacuum Bar Cleaning water quantity by pressing or bending. Caution Rinse the wastewater reservoir with Oblique position clean water or with the rinsing system Risk of damage to the floor covering. Do To improve the vacuuming result on tiled for the wastewater reservoir (option).
Confirm the changed setting by press- Storage ing the Info button or wait till the set val- ue is automatically accepted after 10 Caution seconds. Risk of injury and damage! Note the weight Select the next parameter by turning of the appliance in case of storage.
Page 12
Replace or turn vacuum lips 1 Spring element 2 Push handle Insert a new brush roller. Insert the push bow into the cleaning Reassemble the bearing lid in the re- 1 Wear indicator head intake. verse sequence. 2 Vacuum lip ...
Insert batteries and connect Batteries Removing the batteries Caution Please observe the following warning notes Caution When the batteries are installed and re- when handling batteries: R isk of damage due to tipping appliance; moved, the stability of the appliance can be remove batteries only if the appliance is Observe the directions on the bat- compromised;...
Faults Danger Risk of injury! Before working on the appli- ance, remove the Intelligent Key and the mains plug of the charger. Drain and dispose of the dirt water and the residual fresh water. Faults with display Display Remedy ERR_I_BÜRSTE_049 Check if foreign matters block the brushes;...
Accessories BR appliance B 80 (brush roller accessories) Description Part no.: Part no.: Description Working Working width 650 width 750 Brush roller, red (medium, standard) 6.906-935.0 6.906-936.0 Also for regular cleaning of heavily dirtied floors. Brush roller, white (soft) 6.906-981.0 6.906-985.0 For polishing and cleaning sensitive floors.
Phone: +49 7195 14-0 Product: Floor cleaner For additional information about spare – Fax: +49 7195 14-2212 Type: B 80 W Bp parts, please go to the Service section Relevant EU Directives at www.kaercher.com. Winnenden, 2011/05/01 2006/42/EC (+2009/127/EC) 2004/108/EC Applied harmonized standards EN 55014–1: 2006+A1: 2009+A2: 2011...