Usb - Samsung HW-J450 User Manual

FUNCTIONS

USB

You can play music files located on USB storage devices through the Soundbar.
USB port
1. Connect the USB device to the USB port of the
product.
2. Press the ( ) button on the main unit's top panel
or the (SOURCE) button on the remote control
to select the USB mode.
3. USB appears on the display screen.
• The Soundbar connection to the USB device is
complete.
• The Soundbar automatically turns off (Auto Power
Off) if no USB device has been connected for more
than 25 minutes.
+ Before you connect a USB
device
Be aware of the following:
● If the file name of a folder on a USB device exceeds
10 characters, it is not displayed on the Soundbar's
display.
● This product may not be compatible with certain
types of USB storage media.
● The Soundbar supports the FAT16 and FAT32 file
systems.
- The NTFS file system is not supported.
● Connect USB devices directly to the USB port of the
product. Otherwise, you may encounter a USB
compatibility problem.
● Do not connect multiple storage devices to the
product via a multi-card reader. It may not operate
properly.
● Digital camera PTP protocols are not supported.
● Do not remove the USB device while it is transferring
files.
● DRM-protected music files (MP3, WMA) from
commercial web sites cannot be played.
● External HDDs are not supported.
● Mobile phone devices are not supported.
● File Format Type Compatibility list:
Format Codec
MPEG 1 Layer2
MPEG 1 Layer3
*.mp3
MPEG 2 Layer3
MPEG 2.5
Layer3
Wave_Format_
MSAudio1
*.wma
Wave_Format_
MSAudio2
AAC
*.aac
AAC-LC
HE-AAC
-
*.wav
*.ogg
OGG 1.1.0
FLAC 1.1.0,
*.flac
FLAC 1.2.1
22
Display
Sampling
Bitrate
Rate
80kbps~320kbps
16KHz ~ 48KHz
56kbps~128kbps
48kbps~320kbps
16KHz ~ 96KHz
128kbps~192kbps
24KHz ~ 96KHz 48kbps~64kbps
up to 3000kbps
16KHz ~ 48KHz
50kbps~500kbps
16KHz ~ 96KHz up to 3000kbps