Motorola MVME177 Installation And Use Manual page 156

Configure and Environment Commands
ENV Parameter and Options
Slave Ending Address #2
D
Slave Address Translation Address
#2
Slave Address Translation Select #2
Slave Control #2
Master Enable #1 [Y/N]
Master Starting Address #1
Master Ending Address #1
Master Control #1
Master Enable #2 [Y/N]
Master Starting Address #2
Master Ending Address #2
Master Control #2
D-12
Table D-1. ENV Command Parameters (Continued)
Default Meaning of Default
FFE1FFFF Ending address of the local resource
that is accessible by the VMEbus.
Default is the end of static RAM,
$FFE1FFFF.
00000000 Works the same as Slave Address
Translation Address #1. Default is 0.
00000000 Works the same as Slave Address
Translation Select #1. Default is 0.
01EF DeÞnes the access restriction for the
address space deÞned with this slave
address decoder. Default is $01EF.
Y Yes, set up and enable the Master
Address Decoder #1.
02000000 Base address of the VMEbus resource
that is accessible from the local bus.
Default is the end of calculated local
memory.
EFFFFFFF Ending address of the VMEbus
resource that is accessible from the local
bus. Default is the end of calculated
memory.
0D DeÞnes the access characteristics for the
address space deÞned with this master
address decoder. Default is $0D.
N Do not set up and enable the Master
Address Decoder #2.
00000000 Base address of the VMEbus resource
that is accessible from the local bus.
Default is $00000000.
00000000 Ending address of the VMEbus
resource that is accessible from the local
bus. Default is $00000000.
00 DeÞnes the access characteristics for the
address space deÞned with this master
address decoder. Default is $00.