Download  Print this page

Troubleshooting - AEG BS 35 Operation And Installation Instructions Manual

Shower water heater
Hide thumbs

Advertisement

10
3. Guarantee
For guarantees please refer to the respec-
tive terms and conditions of supply for
your country.
The installation, electrical
connection and first operation of
this appliance should be carried out by a
qualified installer.
4. Trouble-shooting
Fault
No hot water despite
flow volume setting at
right-hand stop.
The unit is not working.
Electricity supply and
flow available.
"ELSD" Light on
The company does not accept liability
for failure of any good supplied which
have not been installed and operated
in accordance with the manufacturer's
instructions.
Cause
The water flow volume required
for the unit to turn on has
not been reached.
- The shower head is
blocked with dirt or
limescale.
- Flow volume too low
The water flow volume
required for the unit to turn
on has not been reached.
- Filter in the cold water
connection pipe blocked
with dirt.
- Water pressure not
enough
- The safety device
activated.
Solution
- Clean shower head
- Increase flow volume.
- Clean the filter after shut-
ting off the cold water
intake
- Increase mains pressure
- Press "Reset" button

Hide quick links:

Advertisement

loading

  Related Manuals for AEG BS 35

This manual is also suitable for:

Bs 45Bs 60Bs 35 eBs 45 eBs 60 e