Page 1
Verify Contents Verify the contents of your system and make sure your computer meets the minimum system requirements. FaceIN Terminal FaceIN User Guide Power Adapter PayClock Software CD Ethernet cable QUICK START GUIDE READ THIS FIRST Mounting Diagram Mounting Bracket...
Page 2
Plug this end of the ethernet cable into an available network jack Mount the FaceIN terminal by choosing your Align the FaceIN terminal with the pins or switch. “shortest” employee and have them stand in on the mounting-plate and secure the two front of the device.
Page 3
You can enroll up to fi ve (5) Administrators. Use keypad to navigate through screens. device confi guration settings. When the FaceIN terminal is powered up and at the home screen, press the key. From the main home screen, press the key.
Page 4
The PIN you enter in the PayClock The default password is lathem software must match the User No. at the FaceIN terminal. The software uses these Important - Make sure your screen saver is not Open PayClock - Open the PayClock software numbers to identify which punches go with showing before inserting the installation CD’s.
Page 5
Enroll Employee Faces Setup Software Connection Once you have successfully updated the FaceIN Terminal with your employees, The screens below indicate the fi rst few key steps in setting up your software you can begin enrolling employee faces. connection. (For more detailed instructions see the User’s Guide).
Page 6
Face Enrollment Tips Keep your eyes centered on the screen at all times during enrollment. Try to keep a solid green box around your face by following steps below. Position Progress Bar Small Circles The progress bar shows status of Adjust Your Action Good! enrollment.
Need help?
Do you have a question about the FACEIN and is the answer not in the manual?
Questions and answers