Table of Contents
Advertisement
Setting upyour TV
_
Favorites browser
Vv_,l
Adding andclearingchannels and inputsin the History List
As a channel or input is tuned, the Channel Browser adds it to the
History List and displays it on the right side of the Channel
Browser. Previously tuned channels/inputs are shifted to the left,
eventually moving offthe left side. Press the BACK CB arrow
button to surf backward through the previously tuned
channels/inputs. Any channel or input that is tuned repeatedly will
not be repeated in the History List, but instead is moved to the end
of the list on the right side of the Chamael Browser.
÷:. All channels that are tuned using the numeric buttons on
the remote control.
olo All channels that are tuned using the _/b(arrow)
buttons
on the remote control.
NOTE
Whenever anitemis selected t hatcannot b etuned(forvarious
reasons), theTVwill automatically tunetothepreviously viewed
channel o r input.
Clearing channels from the History List:
o:o Reconfiguring the ANT/CABLE input will clear the
History List. see "ANT/CABLE IN" on page 51
o:÷ Turning off the TV will clear the History List.
Tuning t othenextprogrammed channel
To tune to the next programmed channel, press the 41/ _,(arrow)
buttons on the remote control or TV control panel.
NOTE
Thisfeature will notfunctionuntilyouhaveprogramed c hannels i nto
theTV'schannel m emory, s ee"Storingchannels i n memory
(optional)"onpage 52
Tuning toa specificchannel ( programmed or unprogrammed)
To tune analog channels:
Press the Channel Number (0-9) on the remote control. For
example, to select channel 125, press 1,2, 5, and then press the
ENTER button.
Tuning digital channels:
Press the Channel Number (0-9) on the remote control, followed by
the (Dash 100) button, and then the sub-channel number. For
example, to select digital channel 125-1, press 1,2, 5, --, 1, and then
press the ENTER button.
Hide quick links:
Advertisement
Table of Contents
