8
Picture and SoundControls
Adjusting the picture
Adjusting the picture quality
The adjustments you make to picture quality under a picture mode are
saved to that picture mode.
Selection
Press (<)
Press (1_)
Backlight*
Darker
Lighter
Contrast
Lower
Higher
Brightness
Darker
Lighter
Color
Paler
Deeper
Tint
Reddish
Greenish
Sharpness
Softer
Sharper
*Backlight: Adjusts the brightness of the entire screen. When in video mode and
no signal is input, this selection is set to O. (Settings are stored in memory.)
NOTE
Somesettings cannotbeadjusted whenthepicturemodeis setto
AutoView.
To adjust the picture quality:
1
Press the SETUP button.
2
Select Picture and press the OK button.
3
Press the A/V (arrow) buttons to select the setting you would
like to adjust (Backlight,
Contrast, Brightness,
Color, Tint, or
Sharpness).
4
Press the I* (arrow) button.
5
Press the "4/I* (arrow) buttons to adjust the setting.
6
Press the EXIT button.
NOTN
o:, Anypicturesettings thatyouadjustaffect t hecurrentinputonly.
Youcanadjustthepicturequalityseparately f or eachinput.
•".. Depending o n a Sharpness v alue,theEdgeEnhancer effect m aybe
reduced.
To reset to the factory defaults:
1
Press the SETUP button.
2
Select Picture > Reset.
3
Press the OK button.
A confirmation screen appears.
4
Press the </1_ (arrow) buttons to select Yes, and then press the OK
button.