Advertisement
Before you start...
Your safety and the safety of others
is very important.
We have provided many important safety
messages in this manual and on your
appliance. Always read and obey all safety
messages.
0
!
This is the safety alert symbol. This
symbol alerts you to hazards that can
kill or hurt you and others. All safety
messages will be preceded by the safety alert
symbol and the word "DANGER" or
"WARNING". These words mean:
Proper installation
is your responsibility. Make
sure you have everything necessary for correct
installation. It is the responsibility of the installer to
comply with the installation clearances specified
on the model/serial rating plate. The model/serial
rating plate can be found on the bottom of the
cooktop.
Check location where cooktop will be installed.
The location should be away from strong draft
areas, such as windows, doors and strong heating
vents or fans. The cooktop should be located for
convenient use in the kitchen.
When installing a cooktop under existing cabinets
and the installation does not meet the minimum
cabinet clearances, install a range hood above the
cooktop to avoid burn hazards.
ALL OPENINGS IN THE WALL OR FLOOR
WHERE THE COOKTOP IS TO BE INSTALLED
MUST BE SEALED.
Do Not obstruct the flow of combustion
and
ventilation
air.
Grounded
electrical
outlet is required. See
"Electrical requirements."
Proper gas supply connection
must be
available. See "Gas supply requirements."
Countertop
opening dimensions
that are shown
must
be used. Given dimensions provide required
0" (0 cm) clearance.
Important:
Observe all governing
codes and
ordinances.
Failure to meet codes and
ordinances
could lead to fire or electric shock.
You will be killed or seriously injured if you
don't follow instructions.
Cabinet
dimensions
30" (76.2 cm) cooktop
- 30" (76.2 cm)
min. cabinet
width above cooktop
36" (91.4 cm) cooktop
- 36" (91.4 cm) d
min. cabinet
width above cooktop
13" (33.0 cm)
max.
-
upper
You can be killed or seriously injured if you
don't follow instructions.
All safety messages will identify the hazard, tell
you how to reduce the chance of injury, and tell
you what can happen if the instructions are not
followed.
for minimum
WARNING:
If the information
in
this manual
is not followed
exactly, a fire or explosion
may
result causing
property
damage,
personal
injury or
death.
- Do not store or use gasoline
or
other flammable
vapors
and
liquids
in the vicinity
of this or
any other appliance.
- WHAT TO DO IF YOU SMELL
GAS
l
Do not try to light any
appliance.
l
Do not touch any electrical
switch.
l
Do not use any phone in your
building.
l
Immediately
call your gas
supplier
from a neighbor's
phone.
Follow the gas
supplier's
instructions.
l
If you cannot
reach your
gas supplier,
call the fire
department.
- Installation
and service
must
be performed
by a qualified
installer,
service
agency
or
the gas supplier.
36" (91.4 cm)
cooktop -
1" (2.5 cm)
min. space to
front edge of
countertop
Wall 'gas line
15" (36.1 cm)
opening
- 5"
max. from
2-112"
bottom of
(6.4 cm)
(12.7 cm) below
countertop
and
countertop
burner box
height
***
Note: 30" (76.2 cm) min. when
bottom
of wood or metal cabinet
is protected
by not less than 114"
(.6 cm) flame retardant
millboard
covered
with not less than No. 26
MSG sheet steel, 0.015" (.04 cm)
stainless
steel, 0.024" (.06 cm)
aluminum
or 0.020" (.05 cm)
copper.
36" (91.4 cm) min. clearance
between
the top of the cooking
platform
and the bottom
of an
unprotected
wood or metal sheet.
power supply
cord
between
the cooktop
and cabinet.
16-3/Y
16-3/4"
(47.6 cm) min. (47.6 cm) min
Cutout dimensions
I'B'I
cutout:
A depth
26-l R"
(67.3 cm) min.
33"
(63.6 cm) min.
B width
It is the customer's
responsibility:
l
To contact
a qualified
electrical
installer.
l
To assure that electrical
installation
is
adequate
and in conformance
with
National
Electrical
Code, ANSUNFPA
70 -
latest edition*
and all local codes
and ordinances.
Mobile home installation
The installation
of this cooktop must conform
to the Manufactured
Home Construction
and
Safety Standards, Title 24 CFR, Part 3280
(formerly the Federal Standard for Mobile
Home Construction
and Safety, Title 24, HUD
Part 280); or when such standard is not
applicable, the Standard for Manufactured
Home Installation
1982 (Manufactured
Home
Sites, Communities
and Setups), ANSI
A225.1/NFPA
501A -
1987, or latest edition,
or with local codes.
2-5ia~~
2-5W
(6.7 cm) min.
(6.7 cm) min.
c fyp~~to
nearest rear
combustible
surface
above
cooktop.
DM
inimum
distance
to
nearest side
combustible
surface
above
COOktOD.
---c-
----
.
.,
-
A
l .
l .
l . .
'\ \
\
\
L---D
&&
D
5-114"
(13.3 cm) min.
S-114"
(13.3 cm) min,
Minimum
distance
to
nearest
side combustible
surface
above cooktop.
Product dimensions
30" (76.2 cm) min. base cabinet
is
required. If cabinet has a drawer, a
3-l/2" (8.9 cm) depth clearance from
the countertop to the top of the drawer
(or other obstruction)
in base cabinet is
required.
30" (76.2
cm)
cooktop
Copies of the standards listed may be obtained from:
l
National
Fire Protection
Association
Batterymarch
Park
Quincy,
Massachusetts
02269
l
* American
Gas Association
1515 Wilson
Boulevard
Arlington,
Virginia
2,2209
36" (91.4 cm) min. base cabinet
is
required. If cabinet has a drawer, a
3-l/2" (8.9 cm) depth clearance from
the countertop to the top of the drawer
(or other obstruction)
in base cabinet is
required.
GrilUgriddle
cooktop
must be used
with suitable
vent hoods.
Panel A
Advertisement
