Download Print this page

Maytag CGR3725ADB User's guide Manual page 8

Advertisement

Available languages

Available languages

Manual Clean Oven Control
(:select models)
A
B
BROIL
....................
TIMER
CLOCK
CANCEL
e
D
E
F
NOTE: The display will show 12:00 when the appliance is first connected to power or if power is interrupted. The Bake and Broil
indicators light when function is pressed.
A
B
D
F
BAKE
BROIL
TIMER
CLOCK
CANCEL
A {More} or
V {Less}
Use for baking and roasting.
Use for broiling and top browning.
Sets timer.
Use to set time-of-day clock.
Cancels all operations except timer
and clock.
Enters or changes time, oven
temperature. Sets HI or LO broil
Using the Teuehpads
° Press the desired pad.
° Press the A or V pad to enter time or temperature.
° A beep will sound each time a function pad is pressed. There
is no beep for the A or V pad.
° A double beep will sound if a programming error occurs.
Note:
Four seconds after pressing the A or V pad, the
time or temperature will automatically be entered, if more
than 30 seconds elapse between touching a function pad
and the A or V pad, the function will be canceled and the
display will return to the previous display.
Setting
the Clock
CLOCK
1. Press the CLOCK pad.
° The clock time cannot be set if the control is pro-
grammed for a bake, broil or timing operation.
2. Set the correct time of day using the A or _ pads. if the
A or V pad is not pressed within 30 seconds, the program
will cancel Press the CLOCK pad and begin again.
Setting
the Timer
The timer can be set from one minute {:01} up to 99 hours
and 59 minutes {99:59}. Time will be displayed in minutes and
not in seconds. THE TIMER DOES HOT COHTROL THE
Press the TIMER pad.
11MER
, 0:00 wiii light and the colon (:} wiii flash in
the display.
2. Press the A or V pad untii the desired time is displayed.
° The timer wiii begin as soon as the time is set.
° The flashing colon indicates that a timing operation is in
progress. Crhe colon wiii not flash if the time of day or
oven temperature is displayed.}
° Two short beeps signal the end of the operation. "0:00"
will appear in the display.
If desired, press the CLOCK pad and the time of day will
briefly reappear in the display during a timing operation.
If desired, press the BAKE or BROIL pads and the
current temperature setting will briefly reappear in the
display during a timing operation.
To cancel
the timer operation:
Press and hold the TIMER pad for several seconds.
7

Advertisement

loading