Touchpad - HP Spectre x360 Maintenance And Service Manual

TouchPad

NOTE: The TouchPad spare part kit includes the TouchPad cable.
Description
For use only on computer models equipped with an AMD processor
Before removing the TouchPad, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the TouchPad:
1. Release the zero insertion force (ZIF) connector (1) to which the TouchPad cable is attached, and then
disconnect the TouchPad cable from the system board.
2. Remove the five Phillips PM1.5×2.3 screws (2) that secure the TouchPad to the top cover.
Bottom cover on page
Battery on page 25).
24).
Spare part number
801499-001
TouchPad 31