Mazda 2008 MX-5 Miata Owner's Manual page 199

MX-5_8X49-EA-07F_Edition2 Page199
Monday, June 25 2007 11:19 AM
qTCS/DSC Indicator Light
This indicator light stays on for a few
seconds when the ignition switch is turned
to the ON position. If the TCS or DSC is
operating, the indicator light flashes.
If the light stays on, the TCS or DSC may
have a malfunction and they may not
operate correctly. Take your vehicle to an
Authorized Mazda Dealer.
qDSC OFF Indicator Light
This indicator light stays on for a few
seconds when the ignition switch is turned
to the ON position.
It also comes on when the DSC OFF
switch is pressed and TCS/DSC is
switched off (page 5-25).
If the light stays on when the TCS/DSC is
not switched off, take your vehicle to an
Authorized Mazda Dealer. The dynamic
stability control may have a malfunction.
Form No.8X49-EA-07F
Warning/Indicator Lights and Beep Sounds
í
NOTE
If the battery is disconnected or a fuse is
replaced, the DSC will be inoperable. In this
case, the DSC OFF indicator light flashes and
the TCS/DSC indicator light illuminates.
To make the DSC operable, do the following
procedure with the battery connected.
1. Turn the ignition switch to the ON position.
2. Turn the steering clockwise fully, then turn
3. Make sure the DSC OFF indicator goes off.
4. Turn the ignition switch to the OFF
5. Make sure the TCS/DSC indicator light
í
If the TCS/DSC indicator light and the DSC
OFF indicator light remain illuminated even
after turning the ignition switch to the ON
position, consult an Authorized Mazda Dealer.
qCruise Main Indicator Light
The indicator light has two colors.
Cruise Main Indicator Light (Amber)
The indicator light illuminates amber
when the ON/OFF switch is pressed and
the cruise control system is activated.
Black plate (199,1)
it counterclockwise fully.
position, then turn it to the ON position
again.
goes off.
(Amber)/Cruise Set Indicator
í
Light (Green)
í
Some models.
Driving Your Mazda
5-51