Electronic Monitor And Diagnostic System - GE TFX24E Use And Care Manual

Electronic Monitor & Diagnostic System
..
It keeps an eye on
things for you.
v???
@ Red signal light flashes to tell
you when either door is open.
@G reen signal light tells you that
the Door Alarm beeper has been
set to sound after either door has
been open 30 seconds.
@Red signal light tells you when
freezer foodkeeping temperature is
above normal.
@G reen lighted word NORMAL
indicates that no failure has been
detected by the diagnostic system.
@Flashing green diagnostic
codes in the display warn you
when:
frozen foods should be
checked.
H power has been interrupted.
icemaker may not be operating
properly.
defrost system has failed.
freezer control may need to be
set for a colder temperature.
What these codes mean—and
what to do when they appear—is
summarized on the inside of the
freezer compartment door and
explained more thoroughly on
the following pages.
@System Check pad putsa
review of the electronic diagnosis
of five coded functions at your
fingertip and also allows you to
erase codes from display.
@Electronic control allows you
to turn night light in water-and-ice
dispenser on and off.
@Electronic control allows you
to select ice cubes or crushed ice,
and green signal light confirms
your choice.
6
When your refrigerator
is first plugged 'in.. ~
All panel lights come on for five
seconds, a beep sounds, and lights
go off except as follows:
s PF
flashes in the display. Touch
SYSTEM CHECK-RESET pad to
erase it.
Green word NORMAL glows.
Red WARM TEMPERATURE
light glows if freezer compartment
temperature is higher than normal.
It goes off when proper foodkeeping
temperature is reached.
Door alarm beeper is activated
$
and green light on DOOR ALARM
pad glows.
CRUSHED ice selection light
glows.
Red DOOR OPEN light flashes if
either door is open, goes out when
doors are shut.
Night light in water-and-ice
dispenser is off.
(continued nextpage) -.