Roasting With Convection - Maytag MGS5875BDW Use And Care Manual

Gas slide-in range - precision touch control 800
Hide thumbs Also See for MGS5875BDW:
Table of Contents

Advertisement

Available languages

Available languages

Oven Cooking

Roasting With Convection

(select models)
When convection roasting, enter your normal roasting
time and temperature. The control will automatically
prompt you to check the food for doneness at 75% of the set
time. The convection fan will start after the oven has
been on for approximately five minutes.
Roasting Notes
• When convection roasting, the cooking time must be set
before setting the temperature.
• If your recipe requires a preheated oven, add 15 minutes
to the cooking time programmed.
• Roasting times can vary with different cuts of meat.
• It is not necessary to preheat when convect roasting
large cuts of meat.
To set Convect Roast:
1. Press the Convect Roast pad.
• ROAST and the fan icon will flash.
• 00:00 will flash in the display.
• 000 lights in the display.
2. Enter the roasting time using the number pads.
• Time can be set from 10 minutes (00:10) to 11 hours,
59 minutes (11:59).
• Press Convect Roast pad again or wait 4 seconds.
• ROAST and the fan icon flash in the display.
• 000 will flash in the display.
3. Select the oven temperature. Press the
Autoset 0 pad for 325° F or the appropriate
number pads.
• Each additional press of the Autoset 0 pad will increase
the temperature by 25 degrees.
• The oven temperature can be set from 170° to 550°.
4. Press Convect Roast pad again or wait four seconds.
• ROAST will stop flashing and light in the display.
• 100° or the actual oven temperature will display. It will
rise in 5 degree increments until the preset temperature
is reached.
• The fan icon will start to rotate.
Notes:
• If a preheat is required, allow the oven to preheat for 8-15
minutes.
• When the set oven temperature is reached, one long beep
will sound and the convection fan will turn on.
5. Place food in the oven.
• Time will start counting down once oven starts heating
up.
• To recall the set temperature during preheat, press the
Convect Roast pad.
6. When 75% of the set cooking time has elapsed, the oven
light will turn on and FOOD will flash in the display. Check
the cooking progress at this time. Cook longer if needed.
• The oven light will remain on until the Oven Light pad is
pressed.
• Press any pad to recall the cook time remaining.
7. When cooking is finished, press CANCEL pad.
8. Remove food from the oven.
10

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents