Electronic Oven Control; Display; Start; Cancel - Maytag MMW7530WDS Use & Care Manual

Maytag built-in electric combination lower oven use and care guide
Table of Contents

Advertisement

Available languages

Available languages

B
C
A
G
A. Oven setting pads
B. Temperature pads
C. Oven light
D. Self-clean
E. Electronic display

Display

When power is first supplied to the appliance, "PF" will appear on
the display. Press LOWER CANCEL to clear.
If "PF" appears at any other time, a power failure has occurred.
Press LOWER CANCEL and reset the Clock if needed.
When the oven is in use, the display shows preheat time and the
temperature and oven setting.
When the oven is not in use, the display shows the time of day.
When using Cook Time (on some models), the display will show
either hours and minutes, or minutes and seconds.
The Start pad begins any oven function except the Timer. If the
Start pad is not pressed within 5 seconds after pressing a
function pad, the "Start?" indicator light will flash as a reminder.
On some models, "START?" will appear on the display.
If the Start pad is not pressed within 4 to 5 minutes (depending
on your model) after pressing a function pad, the oven display will
return to the time of day mode and the programmed function will
be canceled.
The Cancel pad stops any function except the Clock, Timer and
Control Lock.
The cooling fan may continue to operate after an oven function
has been canceled, depending on oven temperature.
4

ELECTRONIC OVEN CONTROL

D
H
I
J
F. Microwave oven controls
G. Cook time functions
H. Hour pad
I. Minute pad

Start

Cancel

E
K
L
M
This is a 12-hour clock and does not show a.m. or p.m.
To Set:
Before setting, make sure the oven, Timer and Timed Cooking
are off.
1. Press CLOCK.
2. Press the HOUR or MINUTE "plus" (+) or "minus" (-) keypads
to set the time of day.
3. Press CLOCK or START.
To Disable:
The clock time can be disabled so that it does not show on the
display. To disable, press and hold CLOCK for 5 seconds. To
display the clock time again, press and hold CLOCK for
5 seconds and the time of day will show on the display. The clock
time should not have to be reset.
Tones are audible signals, indicating the following:
One tone
Valid pad press
Oven is preheated
Function has been entered
Three tones
Invalid pad press
F
J. Timer set and off
K. Clock pad
L. Start pad
M. Lower cancel

Clock

Tones

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mmw7530wdbMmw7530wdw

Table of Contents