Marantz SR4003 User Manual page 32

VIDEO ON/OFF
When no video signal is connected to the unit or
a DVD, etc., is connected directly to your TV, the
unnecessary video circuit can be turned off by
selecting the "VIDEO OFF" setting.
To select video off, press the AMP button and press
the V.OFF button.
DISP MULTI AUTO TUNED ST V – OFF NIGHT PEAK ATT ANALOG SURROUND
SLEEP AUTO SURR DIRECT DISC 6.1 MT X 6.1 SPKR B EQ DIGITAL DIGITAL
L C R
LFE
AAC PCM
SL S SR
VIDEO CONVERT
When this function is activated, the video or
S-video signal can be emitted from the video, S-video
or component video output terminal.
To activate this function, select VIDEO CONVERT in
PREFERENCE menu and set ENABLE.
Notes:
• The component video signal is emitted only from
component video output terminal.
When the video equipment is connected by
component terminal, connect the monitor and the
unit by the component terminal.
• This function is unavailable for the REC out
terminal.
• This function is unavailable for the still picture, fast
forward and reverse playing of the video component.
• If, while attempting to use the video convert feature,
the unit cannot synchronize with the display device,
"NO SIGNAL" appears on the monitor, or noise is
generated, this feature cannot be used. All of these
signs are caused by equipment incompatibility; there
is nothing wrong with the unit.
In such case, set VIDEO CONVERT in the
PREFERENCE menu to DISABLE. Also, connect
the video input signal to the display device via the
MONITOR OUT terminal under VIDEO and the
S-video input signal to the display device via the
MONITOR OUT terminal under S-VIDEO.
Example:
Monitor is connected with the component.
DISP MULTI AUTO TUNED ST V – OFF NIGHT PEAK ATT ANALOG DIGITAL SURROUND DIGITAL
SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1 SPKR B EQ L C R
AAC PCM SL LFE S SR
S-VIDEO VIDEO
COMPONENT
DISP MULTI AUTO TUNED ST V – OFF NIGHT PEAK ATT ANALOG SURROUND
SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1 SPKR B EQ DIGITAL L DIGITAL C R
AAC PCM SL S LFE SR
S-VIDEO
VIDEO
COMPONENT
The signal cannot be converted from the video to
component or S-Video.
DISP MULTI AUTO TUNED ST V – OFF NIGHT PEAK ATT ANALOG SURROUND
SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1 SPKR B EQ DIGITAL L DIGITAL C R
AAC PCM SL S LFE SR
VIDEO
COMPONENT
S-VIDEO
The signal cannot be converted from the component
to the video or S-video.
Notes of OSD menu:
• The setup menu can be displayed through all video
out (COMPONENT, S-VIDEO, VIDEO).
• The setting informations (e.g. volume setting) are
displayed through all video out when the VIDEO
CONVERT function are set ON.
Note:
No setting information is displayed when the
signal is emitted from the COMPONENT IN to
COMPONENT OUT.
• The setting informations (e.g. volume setting) are
displayed through the S-VIDEO or VIDEO out
when the VIDEO CONVERT function are set
DISABLE. When the S-VIDEO and VIDEO outputs
are used simultaneously, the setting informations are
displayed through the S-VIDEO out only.
ENGLISH
HDMI
DISP MULTI AUTO TUNED ST V – OFF NIGHT PEAK ATT ANALOG SURROUND
SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1 SPKR B EQ DIGITAL L DIGITAL C R
AAC PCM LFE
SL S SR
HDMI
VIDEO
S-VIDEO
COMPONENT
DISP MULTI AUTO TUNED ST V – OFF NIGHT PEAK ATT ANALOG SURROUND
SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1 SPKR B EQ DIGITAL DIGITAL L C R
AAC PCM SL LFE S SR
VIDEO
HDMI
S-VIDEO
COMPONENT
Notes of OSD menu:
HDMI: OSD menu is not displayed.
VIDEO/S-VIDEO/component: VIDEO CONVERT
of HDMI is not possible, thus the OSD menu is not
displayed.
29