Tuner Operation - Marantz SR4003 User Manual

Marantz av surround receiver user guide
Hide thumbs Also See for SR4003:
Table of Contents

Advertisement

ENGLISH

TUNER OPERATION

Frequency scan step for AM is selectable.
Default setup is 10 kHz step, if your country's
standard is 9 kHz step, Press BAND button on the
remote controller more than 6 seconds. Scan step
will change.
Note:
Preset memory for the tuner will clear by changing
this setup.
AUTO TUNING
2.
1.
2.
DISP
MULTI
AUTO
TUNED
ST
V – OFF
NIGHT
PEAK
ATT
ANALOG
SURROUND
DIGITAL
DIGITAL
SLEEP
AUTO
SURR
DIRECT
DISC 6.1
MT X 6.1
SPKR B
EQ
L
C
R
AAC
PCM
LFE
SL
S
SR
1.
(Using the unit)
1.
To select tuner and desired band (FM or AM),
press the BAND button on the front panel.
2.
Press the 3 or 4 cursor buttons on the front
panel for more than 1 second to start the auto
tuning function.
3.
Automatic searching begins then stops when a
station is tuned in.
(Using the remote controller)
1.
To select tuner and desired band (FM or
AM), press the BAND button on the remote
controller.
2.
Press the TUNE 3 or 4 for more than 1 second
on the remote controller.
3.
Automatic searching begins then stops when a
station is tuned in.
If tuning does not stop at the desired station, use to
the "Manual tuning" operation.
16
MANUAL TUNING
2.
1.
2.
SURROUND
DISP
MULTI
AUTO
TUNED
ST
V – OFF
NIGHT
PEAK
ATT
ANALOG
DIGITAL
DIGITAL
SLEEP
AUTO
SURR
DIRECT
DISC 6.1
MT X 6.1
SPKR B
EQ
L
C
R
AAC
PCM
LFE
SL
S
SR
1.
(Using the unit)
1.
To select tuner and desired band (FM or AM),
press the BAND button on the front panel.
2.
Press the 3 or 4 cursor buttons on the front
panel to select the desired station.
(Using the remote controller )
1.
To select tuner and desired band (FM or
AM), press the BAND button on the remote
controller.
2.
Press the TUNE 3 or 4 on the remote controller
to tune in the desired station.
DIRECT FREQUENCY CALL
1.
2.
3.
1.
To select tuner and desired band (FM or
AM), press the BAND button on the remote
controller.
2.
Press the F.DIRECT on the remote controller,
display will show "FREQ - - - -".
3.
Input your desired station's frequency with the
numeric buttons on the remote controller.
4.
The desired station will automatically be tuned.
(FM) TUNING MODE (AUTO STEREO OR MONO)
NED
ST
V – OFF
NIGHT
PEAK
ATT
ANALOG
SURROUND
DIGITAL
ECT
DISC 6.1
MT X 6.1
SPKR B
EQ
DIGITAL
L
C
R
AAC
LFE
PCM
SL
S
SR
When in the auto stereo mode, AUTO indicator will
be illuminated on the display.
The "ST" indicator is illuminated when a stereo
broadcast is tuned in.
At open frequencies, the noise is muted and the
"TUNED" and "ST" indicators are not illuminated.
If the signal is weak, it may be diffi cult to tune into
the station in stereo. In such a case, press the
T-MODE button on the front panel or remote
controller.
"AUTO" indicator is not illuminated, if FM stereo
broadcasts are received in monaural and the "ST"
indicator is not illuminated.
To return to auto stereo mode, press the T-MODE
button or press T-MODE button on the remote
controller again. AUTO indicator is illuminated on the
display.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents