INTRODUCTION This procedure defines the installation and wiring for the Auto Charge 12 PIM Automatic Battery Charger. It is suggested that the installer read the entire instruction manual to become familiar with the tasks involved before starting. The Auto Charge 12 PIM Automatic Battery Charger is a compact completely automatic charger designed for installation on vehicles with single battery systems.
INSTALLATION WIRING DIAGRAM POWER AUTO CHARGE 12 PIM SENSE BATTERY NOTE: The sense leads MUST be connected for the charger to operate. IMPORTANT: Battery + and - wire size is 12 awg. Sense + and - wire size is 16 awg. Wire size is for a maximum length of 20 feet.
Vehicle Owner WARRANTY All products of Kussmaul Electronics Company Inc. are warranted to be free of defects of material or workmanship. Liability is limited to repairing or replacing at our factory, without charge, any material or defects which become apparent in normal use within 3 years from the date the equipment was shipped.