JVC GC-X3E-DS Service Manual
JVC GC-X3E-DS Service Manual

JVC GC-X3E-DS Service Manual

Digital still camera

Advertisement

Quick Links

SERVICE MANUAL
Regarding service information other than these sections, refer to the GC-X1E service manual (No.86572). Also,
be sure to note important safety precautions provided in the service manual.

SPECIFICATIONS

Power source
: DC 5 V
Power consumption
: 3.6 W (when the LCD screen is off)
4.8 W (when the LCD screen is on)
Dimensions
: 111 (W) mm x 67 (H) mm x 59 (D) mm
(except protruding parts)
Weight
: Approx. 290 g
(without a Memory card and battery)
Operating temperature
: 0°C to 40°C
Relative humidity
: 35% to 80%
Storage temperature
: –20°C to 50°C
LCD screen
: 2.0 inch, polysilicon TFT (200,000 pixels)
Storage media
: SmartMedia
CCD
: 3.34 million pixels (3.24 million valid pixels),
1/1.8" square pixels, primary color filter,
interlace scan CCD
Focal distance
: 7.5 mm to 17.5 mm
(equivalent to 37mm to 86 mm on a 35 mm still camera)
Lens
: 2.3X optical zoom lens
Video
: 160 pixels x 120 pixels, 20 seconds, JVC original format
Recording format
: Exif Ver. 2.1 (DCF compliant), TIFF (Uncompressed),
DPOF-compatible
Sensitivity
: 80/160/320 (ISO compliant)
Iris value (F value)
: F2.8/3.8, 5.6, 8, 11
Exposure control
: Program AE, iris priority AE
: ±2EV (0.5EV steps)
Exposure compensation
Minimum subject distance
: Approx. 2 cm to 50 cm (in Macro mode)
Light measurement system
: Multi, spot
Flash
: Built-in,
Auto/red-eye prevention/forced/disabled
Recommended distance for flash
: Approx. 2.5 m
Shutter speed
: Auto (Program AE: 1/8 seconds – 1/750 seconds,
Iris priority AE: 2 seconds – 1/750 seconds )
White balance
: Auto/Manual (
Focus
: Auto/Manual
DIGITAL STILL CAMERA
GC-X3E-DS
TM
3.3V (up to 64MB)
, MWB,
,
,
)
Self timer
: 1 second, 8 seconds
Photo quality
: 3 modes (STANDARD/FINE/NO COMP.)
Number of storable photos
: 2032 x 1536: approx. 10/8/0
(with an 8MB Memory card,
1024 x 768: approx. 43/32/3
STANDARD/FINE/NO COMP.)
640 x 480: approx. 87/65/8
Battery
: Lithium ion battery
Printer connector
: Output for optional printer
VIDEO output connector
: Two-pole plug, 3.5 mm diameter (PAL)
Digital output connector
: Mini-USB connector
AC Power Adapter/Charger AA-V37
Power requirement
: AC 110 V – 240 V`, 50 Hz/60 Hz
Power consumption
: 14 W
Output
Charge
: DC 3.6 V
Camera
: DC 5.0 V
Operating temperature
: 0°C to 40°C [when charging: 10°C to 35°C]
Dimensions
: 68 (W) mm x 38 (H) mm x 110 (D) mm
Weight
: Approx. 230 g (without a DC cord)
E. & O. E. Design and specifications subject to change without notice.
STILL CAMERA
, 0.77 A
, 1.5 A
No.86593
October 2000

Advertisement

Table of Contents
loading

Summary of Contents for JVC GC-X3E-DS

  • Page 1: Specifications

    Camera : DC 5.0 V , 1.5 A Video : 160 pixels x 120 pixels, 20 seconds, JVC original format Operating temperature : 0°C to 40°C [when charging: 10°C to 35°C] Recording format : Exif Ver. 2.1 (DCF compliant), TIFF (Uncompressed),...
  • Page 3 2. Mac OS 8.5.1/Mac OS 8.6/Mac OS 9.0 2.1.1 Precautions ..............2-1 2. Available USB port 3. CD-ROM drive JVC Video Decoder 2.1.2 Test instruments required for electrical adjustment ..... 2-1 1. Power PC 603e/120MHz or faster 2.1.3 Required test equipment ..........2-1 Video Player 2.
  • Page 4 The following table indicate different parts number between models GC-X1E, GC-X3E. PACKING ASSEMBLY <M1> MODEL REF NO. GC-X3E GC-X1E ITEM PACKING CASE LY31465-003A LY32048-003A SHEET LY42548-001A –––– HOOD(OP) LY31822-001A –––– POLY BAG QPA01001505 –––– CD-ROM ASSEMBLY LY31074-010A LY31074-015A FILM COPY ADAP. ––––...
  • Page 5: Ccd Board Assembly <02>

    MAIN BOARD ASSEMBLY <01> MODEL REF NO. GC-X3E GC-X1E ITEM MAIN BOARD ASSEMBLY YB10282P-06 YB10299E-03 CCD BOARD ASSEMBLY <02> MODEL REF NO. GC-X3E GC-X1E ITEM MAIN BOARD ASSEMBLY YB10283P1-04 YB10300E1-02 MONI REG BOARD ASSEMBLY <03> MODEL REF NO. GC-X3E GC-X1E ITEM MONI REG BOARD ASSEMBLY YB10283P4-04...
  • Page 6: Important Safety Precautions

    Important Safety Precautions Prior to shipment from the factory, JVC products are strictly inspected to conform with the recognized product safety and electrical codes of the countries in which they are to be sold. However, in order to maintain such compliance, it is equally important to implement the following precautions when a set is being serviced.
  • Page 7 Safety Check after Servicing Examine the area surrounding the repaired location for damage or deterioration. Observe that screws, parts and wires have been returned to original positions, Afterwards, perform the following tests and confirm the specified values in order to verify compli- ance with safety standards.
  • Page 9: Disassembly Method ( I )

    SECTION 1 DISASSEMBLY NOTE : This service manual has indicated only the item different from GC-X1E-S No.86572. 1.3.2 Disassembly method ( I ) NOTE STEP PART NAME FIG. NO. POINT FRONT CASE Remove screws REAR CASE 2 (115), 3 (156), 4 (157), 1 (154) 1-3-1 OPERATION UNIT Remove the Connector...
  • Page 10 Note 5 Pass this through the inside of the boss. MONI/REG BOARD ASSY < 02 > (SD1) MAIN BOARD ASSY < 01 > CCD BOARD ASSY < 03 > (SD3) (SD4) (SD5) JACK BOARD ASSY OP BLOCK ASSY < 04 > <M3>...
  • Page 11: Electrical Adjustment

    However, if both or either of the following parts is replaced, it needs special adjustment with a personal computer at a JVC service equipment after the part replacement • OP block assembly Cleaning cloth •...
  • Page 12: Setup (Ccd Adjustment)

    2.1.5 Setup (CCD ADJUSTMENT) Setup for electrical adjustment with personal computer Note 1: As a general rule for adjustment with a personal computer, connect a personal computer to its DIGITAL terminal. Note 2: Use DC cord to supply the power. Service support system YTU94057-49 Jig connector cable...
  • Page 13: Setup With Patch Cords And Jig Connector Cables

    Setup with patch cords and jig connector cables Note: Fig. 2-2-1 shows an example of expansion setup that facilitates inspection of major boards because main components are connected by means of patch cords and jir cables.For proceeding to electrical adjustment in such the setup, disassemble the set at certain level required for the current adjustment objectives referring to the section 1 "DISASSEMBLY"...
  • Page 16 VICTOR COMPANY OF JAPAN, LIMITED S40894 VIDEO DIVISION Printed in Japan...

Table of Contents