Advertisement
Quick Links
11. Troubleshooting
WARNING: To reduce the risk of
personal injury, unplug the vacuum
cleaner before performing maintenance or
troubleshooting checks.
PROBLEM: The cleaner won't run
Cause: Not properly plugged into electrical
outlet.
Solution: Plug in firmly.
Cause: No electricity in electrical outlet.
Solution: Check fuse or breaker.
Cause: On/off switch not turned on.
Solution: Push on/off switch to 'on'.
Cause: Blown fuse/tripped breaker.
Solution: Reset circuit breaker or replace fuse.
VAXCARE
If you require any further assistance or advice about any
VAX please call VAXCARE on
1300 36 4040
(Australia -
0800 800 900
and
296 Victoria Road Malaga Western Australia 6090.
EMAIL: vaxcare@vax.com.au
WEBSITE: www.vax.com.au
AUST. & NZ BRANCHES
• NSW/ACT
Unit 2, 30 Heathcote Road,
Moorebank, New South Wales 2170
Ph: (02) 9602 6800 Fax: (02) 9602 6900
• VICTORIA/TASMANIA
Unit 3, 46 Burgess Road,
Bayswater North, Victoria 3153
Ph: (03) 9761 7160 Fax: (03) 9761 7175
• SOUTH AUSTRALIA/
NORTHERN TERRITORY
Unit 3, 75-77 Grange Road,
Welland, South Australia 5007
Ph: (08) 8340 2222 Fax: (08) 8346 7933
PROBLEM: Cleaner won't pick up/
loss of suction
Cause: Dust bag not installed correctly.
Solution: Review dust bag removal and
replacement.
Cause: Dust bag full or blocked.
Solution: Replace dust bag.
Cause: Clogged filter.
Solution: Remove filter and clean.
Cause: Blockage in hose.
Solution: Disconnect hose, remove the
obstruction then re-fit.
PROBLEM: Cleaner/accessories won't
pick up
Cause: Accessories not connected properly.
Solution: Refer to page 6 for fitting
information.
Cause: The hose is clogged.
Solution: Remove hose and tools. Remove
obstruction.
Please register your warranty.
Send in your completed Warranty Card.
cost of a local call)
(NZ)
VAX Appliances (Australia) Pty Ltd
A.C.N. 009099736
• QUEENSLAND
186 Kerry Road,
Archerfield, Queensland 4108
Ph: (07) 3216 7350 Fax: (07) 3216 7375
• WESTERN AUSTRALIA
296 Victoria Road,
Malaga, Western Australia 6090
Ph: (08) 9247 8100 Fax: (08) 9247 8192
• VAX APPLIANCES NEW ZEALAND
27 Clemow Drive
Mt Wellington, Auckland
Ph: (09) 5736220 Fax: (09) 5736224
Email: vaxnz@vax.co.nz
www.vax.com.au
VAXCARE Service & Help:
AUSTRALIA 1300 36 4040
NEW ZEALAND 0800 800 900
If you have any queries or concerns about
using your Vax, call VAXCARE.
Please make a note of the model
number and model name of the
appliance before calling.
(Aust only: Mon-Fri. 10.00am to
6.00pm. EST)
Calls are charged at the
local rate.
An answerphone is available
outside of these hours. We
will return your call the next
working day.
There are over 300 approved
Vax Service Agents in Australia
and New Zealand. For the nearest
Service Agent, please refer to your
Vax warranty or call VAXCARE or
visit www.vax.com.au
Instruction Manual
Vaxcare:
AUST: 1300 36 4040
NZ: 0800 800 900
Please read carefully before using this cleaner.
Retain for future reference.
Always fully unwind the mains cable before use.
Advertisement
Related Manuals for Vax V-303 Wash "N' Dry
Summary of Contents for Vax V-303 Wash "N' Dry
-
Page 1: Troubleshooting
Vax Service Agents in Australia and New Zealand. For the nearest Service Agent, please refer to your • NSW/ACT • QUEENSLAND Vax warranty or call VAXCARE or Unit 2, 30 Heathcote Road, 186 Kerry Road, visit www.vax.com.au Moorebank, New South Wales 2170... -
Page 2: Safety Instructions
If the supply cord and/or plug is damaged, replacing back into the machine. Replace NOTE: The unit must be unplugged from they must be replaced by a Vax Service with a new filter as necessary. the mains socket outlet after use, and before Agent or similarly qualified persons in cleaning or maintaining the unit. -
Page 3: Parts Overview
17 Upholstery wash tool cleaner aligning the front of the dust bag the flow, pull the black collar on the wash 6 Casters 18 Vax Carpet Cleaner Solution with the inlet slots (Fig.9/3). tool backward (Fig.8/5). 7 Suction hose connection port... - Page 4 ‘sound’ due to sucking Fig.7/6 air. Refill the water reservoir with clean water and Vax Carpet Cleaner. Be sure to empty the dirty water recovery bucket at this time. 6. If the dirty water recovery bucket becomes full, the ‘sound’...
- Page 5 4. Replace Clean Water Tank (A) inside Dirty 7. Assembly Fit the dust bag by aligning the front of the dust Push the extension tubes onto the end of the Water Tank (B) taking care to ensure that bag with the inlet slots, and position the dust handle (Fig.3/10).
-
Page 6: Carpet Cleaning
Test on a small inconspicuous area prior to (max 40°C) water to point indicated on the washing. Gently rub the cloth over the area. tank. Add 1 capful of Vax Carpet Cleaning Check each colour for colour bleeding. If the solution per litre of water (unless otherwise cloth remains clean, it should be safe to clean stated on the bottle) (Fig 6/3).