Makita HR2450F Instruction Manual page 9

1
2
1. Bit shank
2. Bit grease
1
1. Bit
2. Chuck cover
1
1. Bit
2. Chuck cover
1
1. Lock button
2. Action mode changing knob
Installing or removing the bit
001296
Clean the bit shank and apply bit grease before installing the
bit.
Insert the bit into the tool. Turn the bit and push it in until it
001297
engages.
After installing, always make sure that the bit is securely held
in place by trying to pull it out.
2
To remove the bit, pull the chuck cover down all the way and
001298
pull the bit out.
2
Bit angle (when chipping, scaling or demolishing)
003576
The bit can be secured at the desired angle. To change the
bit angle, depress the lock button and rotate the action mode
changing knob to the O symbol. Turn the bit to the desired
angle.
2
9