Indesit IDS 105 Operating Instructions Manual

Indesit IDS 105 Operating Instructions Manual

Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for Indesit IDS 105

  • Page 1: Table Of Contents

    Control panel Loading the racks, 6 Lower rack Cutlery basket Upper rack Start-up and use, 7 IDS 105 Starting the dishwasher Measuring out the detergent Wash options Wash cycles, 8 Table of wash cycles Rinse aid and refined salt, 9...
  • Page 2: Installation

    Installation Connecting the water inlet hose Keep this instruction manual in a safe place for future • To a suitable cold water connection point: before attaching reference. If the appliance is sold, given away or moved, the hose, run the water until it is perfectly clear so that any please ensure the manual is kept with the machine, so that impurities that may be present in the water do not clog the the new owner may benefit from the advice contained within...
  • Page 3: Advice Regarding The First Wash Cycle

    Electrical connection Anti-condensation strip Before inserting the plug into the electrical socket, make After installing the dishwasher, open the door and stick the sure that: adhesive transparent strip under the wooden shelf in order to protect it from any condensation which may form. • The socket is earthed and complies with current regulations.
  • Page 4: Electrical Connection

    Electrical Connection Electrical Connection As the colours of the wires in the mains lead may not If your appliance is supplied with a 13 amp. fused plug it correspond with the coloured markings identifying the can be plugged into a 13 amp socket for immediate use. terminal in your plug, proceed as follows: Before using the appliance please read the instruction below.
  • Page 5: Description Of The Appliance

    Description of the appliance Overall view Upper rack Upper sprayer arm Tip-up compartments Rack height adjuster Lower rack Lower sprayer arm Cutlery basket Washing filter Salt dispenser Detergent and rinse aid dispensers Data plate Control Panel Control panel Start/Pause button and indicator light Select wash cycle knob Low Salt...
  • Page 6: Loading The Racks

    Loading the racks Tilt A Tilt B Tilt C Before loading the racks, remove all food residues from the crockery and empty liquids from glasses and cups. Arrange the crockery so that it is held in place firmly and does not tip over. After loading the appliance, check that the sprayer arms can rotate freely.
  • Page 7: Start-Up And Use

    Start-up and use Starting the dishwasher Measuring out the detergent A good wash result also depends on the correct amount 1. Turn the water tap on. of detergent being used; exceeding the stated amount 2. Press the ON/OFF button: all the indicator lights on the does not result in a more effective wash and increases control panel will light up for a few seconds.
  • Page 8: Wash Cycles

    Wash cycles If the crockery is only lightly soiled or if it has been rinsed with water before being placed in the dishwasher, reduce the amount of detergent used accordingly. The number and type of wash cycles and options may vary depending on the dishwasher model. Detergent Wash cycle Wash cycles...
  • Page 9: Rinse Aid And Refined Salt

    Rinse aid and refined salt E.g.: wash cycle 1, water hardness level 1 Only use products which have been specifically wash cycle 2, water hardness level 2, etc. etc., up to a maximum designed for dishwashers. of 5 levels. Do not use table salt or industrial salt, or washing (The default water softener setting is level 3).
  • Page 10: Care And Maintenance

    Care and maintenance - Replace the filter and screw the water hose back into position. Cleaning the filters The filter assembly consists of three filters which remove food residues from the washing water and then recirculate the water. They should be cleaned if you wish to achieve the best results in every wash.
  • Page 11: Precautions And Advice

    Precautions and advice Saving energy and respecting the This appliance was designed and manufactured in environment compliance with current international safety standards. The following information has been provided for safety reasons and Saving water and energy should therefore be read carefully. • Only begin a wash cycle when the dishwasher is full. While General safety waiting for the dishwasher to be filled, prevent unpleasant...
  • Page 12: Troubleshooting

    Troubleshooting Whenever the appliance fails to work, check for a solution from the following list before calling for AFTER SALES SERVICE. Problem: Possible causes / Solutions: The dishwasher does not start or cannot • Switch off the appliance by pressing the ON/OFF button, switch it back on after be controlled approximately one minute and reset the program. • The appliance has not been plugged in properly. • The dishwasher door has not been shut properly. The door won’t close • The lock was released. Strongly push the door until a “clacking” noise is heard. No water drains out from the dishwasher. • The dishwasher cycle has not yet finished. • The water inlet hose is bent (see Installation).
  • Page 13: Guarantee

    5 Year Parts Guarantee Indesit also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering your appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for our engi- neer’s time.
  • Page 14: After Sales Service

    After Sales Service After Sales Service No one is better placed to care for your Indesit appliance during the course of its working life than us – the manufacturer. Essential Contact Information Indesit Service We are the largest service team in the UK and Ireland offering you access to 400 skilled telephone advisors and 1000 fully qualified engineers on call to ensure you receive fast, reliable, local service.
  • Page 16 195081500.03 09/2013 pb - Xerox Fabriano...

Table of Contents