Related Manuals for Makita 6043D
Summary of Contents for Makita 6043D
- Page 1 Cordless Drill MODEL 6043D I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. w w w . m a k i t a t o o l s . c o m...
-
Page 2: Specifications
Electrical Safety 4. A battery operated tool with integral bat- teries or a separate battery pack must be 6043D 10 mm (3/8”) 4.5 x 20 mm (3/16” x 3/4”) 450/min. 201 mm (7-7/8”) 0.84 kg (1.9 lbs) - Page 3 recharged only with the specified charger for the battery. A charger that may be suit- able for one type of battery may create a risk of fire when used with another battery. 5. Use battery operated tool only with specif- ically designated battery pack.
-
Page 4: Specific Safety Rules
6. Keep hands away from rotating parts. 7. Do not leave the tool running. Operate the tool only when hand-held. 8. Do not touch the drill bit or the workpiece immediately after operation; they may be extremely hot and could burn your skin. - Page 5 (1) battery charger, (2) battery, and (3) product using battery. 3. CAUTION - To reduce risk of injury, charge only MAKITA rechargeable Other types of batteries may burst caus- ing personal injury and damage. 4. Do not expose charger to rain or snow.
- Page 6 2. Do not charge the tool when temperature is BELOW 10°C (50°F) or ABOVE 40°C (104°F). 3. Do not attempt to use a step-up trans- former, an engine generator or DC power receptacle. 4. Do not store the tool in locations where the temperature may reach or exceed 50°C (122°F).
-
Page 7: Functional Description
FUNCTIONAL DESCRIPTION 002059 1. Charging plug 002072 1. Switch trigger 002085 1. Reversing switch CAUTION: • Always be sure that the tool is switched off before adjusting or checking function on the tool. Charging Connect the charging plug to the charging connector, then plug in the charger to the power receptacle. -
Page 8: Installing Or Removing Driver Bit Or Drill Bit
Always be sure that the tool is switched off before carrying out any work on the tool. Installing or removing driver bit or drill bit Hold the ring and turn the sleeve counterclockwise to open the chuck jaws. Place the bit in the chuck as far as it will go. -
Page 9: Maintenance
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. DISPOSING OF TOOL A Ni-Cd battery is built into the handle of the tool. Always... -
Page 10: Recycling The Battery
It can explode in a fire or toxic materials can leak out of it. Recycling the Battery The only way to dispose of a Makita battery is to recycle it. The law prohibits any other method of disposal. To recycle the battery: 1. - Page 11 CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
- Page 12 Memo...
- Page 13 First-Class Postage Required Post Office will not deliver without proper postage. Makita U.S.A., Inc. 14930 Northam Street La Mirada, CA 90638-5753 Fold...
- Page 14 Paste 3. How did you learn about this product: Magazine From Dealer Newspaper Store Display Catalog 4. Most favored points are: Design Features Size Price Makita Brand MODEL NO. YEAR SERIAL NO. PHONE 20-29 30-39 40-49 Paste Paste Radio Exhibition...
-
Page 15: Factory Service Centers
Date Purchased When you need service: Send complete tool (prepaid) to one Dealer’s Name & Address of the Makita Factory Service Centers listed, or to an Authorized Makita Service Center. Be sure to attach a letter to the outside of Model No. -
Page 16: Warranty Policy
MAKITA LIMITED ONE YEAR WARRANTY Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase.