Video - Magnavox ZV427MG9 Owner's Manual

Video

SOURCE TIMER SET
.@/:
1
GHI
4
PQRS
7
TIMER
DISC MENU
s s
TITLE
j
F
--
HDMI
REC REC MODE D.DUBBING
I
Press [STOP C] if you are playing back a disc.
1
Press [SETUP] and use [K / L] to
select "General Setting", then press
[OK].
2
Use [K / L] to select "Video", then
press [OK].
3
Use [K / L] to select a desired item,
then press [OK].
1
Progressive Scan
2
TV Aspect
3
Video Input
Submenu will appear.
4
Refer to 1 to 2 on page 76 and set
the selected item.
3
• For refer to page 15.
5
When you finish with setting, press
[SETUP] to exit.
76 76 EN EN
SETUPS
STANDBY-ON
DISPLAY OPEN/CLOSE
A
ABC DEF
2 3
JKL MNO
5 6
TUV WXYZ
8 9
SPACE CLEAR
0
SETUP SETUP
o o
OK OK
B B
RETURN
p p
B i i
C
h g C
TRACKING
+
VCR DVD
AUDIO
1
Progressive Scan (Default : OFF)
This unit is compatible with the progressive scan system.
The feature provides you with the higher definition
images than the traditional output system does. To utilize
this feature, you must set progressive scan mode to "ON".
1) Use [K / L] to select "ON", then press [OK].
General Setting
Playback
Display
Video
Progressive Scan
Recording
ON
Clock
OFF
HDMI
Reset All
2) Use [{ / B] to select "Yes", then press [OK].
General Setting
Playback
Activating progressive scan:
Display
Check your TV has progressive scan
Video
Progressive Scan
and connect with component video cable.
Recording
ON
Clock
OFF
HDMI
NOTE :
Reset All
If there is no picture or picture is
distorted after selecting
Wait about 15 seconds for auto recovery.
Activate?
3) Use [K / L] to select "Yes" within 15 seconds, then
press [OK].
Your setting will be activated.
Note
• If your TV is compatible with progressive scan (525p /
480p), you are recommended to use the HDMI or
component video cable (commercially available) to
connect this unit to the TV. (Refer to "Method 2" on
page 16, or page 17.) If not, use the RCA video cable
and set the progressive scan to "OFF" or press and hold
[SETUP] for more than 3 seconds during DVD playback.
• When selecting "No" or not pressing any buttons on
the unit or remote control within 15 seconds at step 3,
progressive scan remains to be "OFF" (interlace scan).
2
TV Aspect (Default: 4:3 Letter Box)
You should select the TV aspect ratio to match the TV you
are connecting to the unit. You either have a standard 4:3
TV or a widescreen TV (16:9 rectangular).
Use [K / L] to select your desired option, then press
[OK].
General Setting
Playback
Display
Video
TV Aspect
Recording
4:3 Letter Box
Clock
4:3 Pan & Scan
HDMI
16:9 Wide
Reset All
If you have a standard TV:
Select "4:3 Letter Box" or "4:3 Pan and Scan". The "4:3
Letter Box" setting will display the entire widescreen
DVDs on your standard TV, by placing black bars at the
top and bottom of the picture, like a normal DVD player
does. The "4:3 Pan and Scan" setting will fill the screen
vertically, but both sides of the widescreen DVDs will
be trimmed. Standard video input and standard DVDs
will appear normal with either setting.
If you have a widescreen TV:
Select the "16:9 Wide" setting. Widescreen DVDs will fill
the screen appropriately. To watch standard 4:3 video,
use your TV's aspect control to set the screen to your
liking.
Progressive Scan
TV Aspect
Video Input
Progressive Scan
TV Aspect
Select Video
"Yes",
Yes No
Progressive Scan
TV Aspect
Video Input