Magnavox ZV427MG9 Owner's Manual page 32

Checking, canceling, or correcting the timer
programming information
1) Press [TIMER SET].
will disappear on the front panel display.
2) Press [TIMER].
3) Check the information on the list you will need.
Timer Programming
JAN/ 2/08 12:00 AM E1 SP
SP (1:00)
Date
JAN/02 12:00AM 1:00AM
4-A) To delete the timer program:
1 Use [K / L] to select the program you want to
delete, then press [OK].
2 Use [K / L] to select "Delete", then press [OK].
Confirmation window will appear.
3 Use [K / L] to select "Yes", then press [OK].
4-B) To correct the timer program:
1 Use [K / L] to select the program you want to
correct, then press [OK].
2 Use [K / L] to select "Program Change", then
press [OK].
3 Correct the timer program by using
[K / L / { / B], then press [OK].
5) Press [TIMER] to exit.
6) Press [TIMER SET] to return to the timer standby
mode.
To stop the timer recording in progress
Press [STOP C] on the front panel to stop the disc
recording.
Press [STOP C/EJECT A] on the front panel to stop the
cassette tape recording.
[STOP C] on the remote control is not effective.
Note
• Press [TIMER] to check the timer recording in progress.
When the timer recording is proceeding, that
program will be highlighted with red. In this case,
you cannot select any other program.
30 30 EN EN
TIMER RECORDING
TUE JAN/01 11:00AM
Start End E1/E2
E1
New Program
1/1
If the timer program did not complete correctly,
the error number appears in the timer pro-
gramming list.
Timer Programming
Date Start
E41 JAN/02 12:00AM 1:00AM
New Program
Each error number means:
E1-22 Recording error other
E37-39 than below
E24 Unrecordable disc
E25-26 Copy prohibited
program
E29 Disc protected
E30 Disc full
E35 PCA full *1
E36 Already finalized
video format disc
E40 Some portion has
not been recorded
because of program
overlapping.
Recording did not
start at the starting
time.
• E23, E27, E28, E31, E32, E33 and E34 are not displayed.
• A program with the error number is grayed in the timer
programming list.
• Once the timer programming list with error line(s) is
displayed, or after canceling and setting again the timer
standby mode, the program line(s) with error will be
cleared.
*1 PCA is a disc's space reserved for recording test.
WED JAN/02 11:00AM
End E1/E2
E1
1/1
E41 Power failed
E42 No disc when
recording
E43 Already 49 titles
recorded
E44 Already 254 chapters
recorded
E45 Copy prohibited
program
E46 It is impossible to
record additionally
on a disc recorded
by other units
when setting "
Make Recording
Compatible" to "OFF".