Connection To A Tv With An Hdmi™ Compatible Port - Magnavox ZV427MG9 Owner's Manual

Magnavox digital video disc recorder with video cassette recorder owner's manual
Hide thumbs Also See for ZV427MG9:
Table of Contents

Advertisement

CONNECTION TO A TV WITH AN HDMI™ COMPATIBLE PORT
A simple 1-cable connection with a device having an
HDMI (high-definition multimedia interface) connector
allows digital transfer of both digital video signals and
multi-channel audio signals.
Available for DVD only
TV
this unit
When connecting with an HDMI cable, the audio signal
will be output as the digital audio signal simultaneously,
so you do not need the analog audio connection
described on page 16.
Cables not included.
Please purchase the necessary cables at your local store.
Actual Output Modes by Media
Audio recording format of the disc
Dolby Digital
DVD-video
LPCM
For audio CD and MP3 files, 2 channel PCM will be output regardless of the "Dolby Digital" setting.
If the connected device is not compatible with HDMI BITSTREAM, audio will be output as PCM even if you select
"Stream" in "Dolby Digital" setting (Refer to page 70).
Copyright protection system
To play back the digital video images of a DVD via an HDMI connection, it is necessary that both the player and the
display device (or an AV amplifier) support a copyright protection system called HDCP (high-bandwidth digital
content protection system). HDCP is copy protection technology that comprises data encryption and authentication
of the connected AV device. This unit supports HDCP. Please read the operating instructions of your display device
(or AV amplifier) for more information.
*HDMI: High Definition Multimedia Interface
Note
• Because HDMI is an evolving technology, it is possible
that some devices with an HDMI input may not
operate properly with this unit.
• When using an HDCP-incompatible display device, the
image will not be viewed properly.
• Among the devices that support HDMI, some devices
can control other devices via the HDMI connector;
however, this unit cannot be controlled by another
device via the HDMI connector.
• The audio signals from the HDMI connector (including
the sampling frequency, the number of channels and bit
length) maybe limited by the device that is connected.
• Among the monitors that support HDMI, some do not
support audio output (for example, projectors). In
connections with device such as this unit, audio signals
HDMI IN
HDMI cable
HDMI OUT
Dolby Digital setting of this unit
PCM
Stream
PCM
Stream
HDMI Mode and Actual Output Signals
Press [HDMI] to select the HDMI output mode. The
output mode changes as follows every time [HDMI] is
pressed.
Front Panel Display
Press [HDMI]
Press [HDMI]
Press [HDMI]
Press [HDMI]
• The HDMI mode that is not supported by display
device will be skipped.
Actual output
2channel PCM
Dolby Digital
2channel PCM
are not output from the HDMI output connector.
• When this unit's HDMI connector is connected to a
DVI-D compatible monitor (HDCP compatible) with an
HDMI-DVI converter cable, the signals are output in
digital RGB.
• When the power failure occurs, or when you unplug
the unit, some problems in the HDMI setting might
occur. Please check and set the HDMI setting again.
• When the unit is connected with an HDMI cable, a
revocation list update screen may appear when you try
to play back the DVD-video containing a revocation list.
• If the unit is connected to the unauthorized display device
with an HDMI cable, the audio/video signal may not be
output when playing back a commercial DVD-video.
Video Output Signal
480 Progressive
720 Progressive
1080 interlaced
1080 Progressive
EN
EN
17
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents