Optional Settings S; Optional Setting; Changing The Dvd Settings (In The Setup Menu) - Magnavox DV220MW9 Owner's Manual

Changing the DVD Settings (in the setup menu)

In the setup menu, you can customize the various kinds of settings as you prefer.
Refer to the following instructions to navigate through the setup menus.
1) Press [SETUP].
2) Use [s / B] to select a setup item.
3) Use [K/ L] to go up or down in the menu list.
4) Press [OK] to access the sub contents of the highlighted item.
5) Use [K/ L] to select a setting.
6) Press [SETUP] to exit.
• The following table is the contents which you can set and the default settings. Refer to the table for useful operation.
• Your change to each setting stays on even when the unit is turned off.
Setup menu (highlight is the default)
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
TV ASPECT
STILL MODE
DRC
( Dynamic Range Control)
DOWN SAMPLING
DOLBY DIGITAL
PASSWORD
LEVEL
CHANGE
ANGLE ICON
AUTO POWER OFF
EN
OPTIONAL SETTINGS
OPTIONAL SETTINGS
Contents
Set the language for
ORIGINAL
audio.
ENGLISH
FRENCH
SPANISH
• •
•
OTHER
Set the language for
OFF
subtitles.
ENGLISH
FRENCH
SPANISH
• •
•
OTHER
Set the language for
ENGLISH
disc menu language.
FRENCH
SPANISH
• •
•
OTHER
Set the language for
ENGLISH
OSD (on-screen
FRANÇAIS
display).
ESPAÑOL
Set the picture size
4:3 LETTER BOX
according to aspect
4:3 PAN & SCAN
ratio of your TV.
16:9 WIDE
Set the type of still
AUTO
image in pausing
FIELD
playback.
FRAME
Select "AUTO"
usually.
Set to "ON" to
ON
compress the range
OFF
between soft and
loud sounds.
Set to "ON" when
ON
outputting in 48kHz.
OFF
Set to "OFF" when
outputting the
original sound.
Set the type of sound
BITSTREAM
signal which outputs
PCM
from the digital
audio output jack.
Enter the password.
NO
YES
Set the parental level for DVD playback. (Refer to page 24.)
LEVEL8 [ADULT]
LEVEL7 [NC-17] to
LEVEL1 [KID SAFE]
Set and change the password. (Refer to page 24.)
Set whether to display the angle icon or not.
ON
OFF
Set to "ON" to turn off this unit automatically after 30 minutes of no use.
ON
OFF
Notes
• Language options are not available with some discs.
• Only the languages supported by the disc can be selected.
• "LANGUAGE" setting for "AUDIO" and "SUBTITLE" are not
available with some discs. Then use [AUDIO
Refer to page 19.
• Select "4:3 LETTER BOX" so that black bars may appear on the
top and bottom of the TV screen.
• Select "4:3 PAN & SCAN" for a full height picture with both sides adjusted.
• Select "16:9 WIDE" if a wide-screen TV is connected to this unit.
• "AUTO" automatically selects the best resolution setting
("FRAME" or "FIELD") based on the data characteristics of the
pictures. Some pictures may be blurred when you select "AUTO"
in the still mode due to their data characteristics.
• An individual picture on the TV screen is called a "frame", which
consists of two separate images called as "field".
• If you select "FIELD", the picture in the still mode will be
stabilized. If you select "FRAME", the picture in the still mode will
be highly defined.
• This function is available only on the discs which are recorded in
the Dolby Digital format.
• When playing back a 96kHz disc with the copyright protection, or
when virtual surround is set to "1" or "2", the sound will be down
sampled at 48kHz even if the "DOWN SAMPLING" is set to "OFF".
• This function is available only on digital outputting of a disc
recorded in 96kHz.
• Select "PCM" when the unit is connected to a 2ch digital audio
device.
• Select "BITSTREAM" when the unit is connected to a Dolby
Digital decoder.
] and [SUBTITLE].
23