Advertisement
1
LABEL
STANDBY-ON
PROGRESSIVE SCAN
To simply play a Disc, follow these steps. Additional playback
features are described in the accompanying owner's manual.
Press STANDBY-ON on the front of the DVD Player to
1
turn on the DVD Player.
Turn on your TV. Set it to the correct AV In channel.
2
You should see the DVD Player's blue DVD screen on the TV
(if no Disc is in the DVD Player).
Press OPEN/CLOSE / on the front of the DVD Player to
3
open the disc tray.
Load your Disc in the tray, with the label facing up. If the
4
Disc (DVD) is two-sided, make sure the label of the side you
want to play is facing up. Press OPEN/CLOSE / again to
close the tray.
Playback may start automatically. If not, press PLAY B.
5
If a Disc menu appears, use the 1 234 and OK buttons or the
Number buttons to select features or start playback from a
menu. Follow the instructions in the Disc menu.
To stop playing the Disc, press STOP 9.
6
Region Codes
DVDs must be labeled for ALL regions or for Region 1 in order
to play on this DVD Player. You cannot play Discs that are labeled for
other regions. If one of these logos appears on your DVD or its case, it
should play on this DVD Player.
Color Systems
Recordings are made according to a color system. The most common
color system in the United States is NTSC.This DVD Player is compatible
with NTSC and PAL. Make sure the Discs you play were recorded in
NTSC or PAL and your TV is NTSC or PAL compatible. Look for
the color system of the DVD on the DVD or on the Disc case. Set TV
Type accordingly at the DVD Player. See page 36 of the owner's manual.
NTSC
PAL
Detailed playback features and additional functions are described in the
Quick-Use Guide (cont'd)
Quick-Use Guide (cont'd)
OPEN/CLOSE
NO DISC
NO DISC
3-4
accompanying owner's manual.
DVD VIDEO PLAYER
MDV458
STOP
PLAY/PAUSE
IR
2
6
PREVIEW
MUTE
RETURN/TITLE
DISPLAY
PREV
NEXT
5
PLA
Y
STOP
AUSE
P
OK
DISC MENU
SYSTEM MENU
SUBTITLE
ANGLE
ZOOM
REPEAT
REPEAT A-B
AUDIO
REMOTE CONTROL
8239 300 31052
Printed in China
Advertisement
