PCB. DIS DCS 6000 Digital Conference System. It can also be ordered (customized) for other The BM 6620 is available for retrofit in the FC/FD and FC/FD 6xxxF units and delivered standard flush mounted units FC 602xF and FD already mounted in the units.
DIS Digital Conference System User Manual Installation For the installation of BM 6620 do the following: Undo the three M3 nuts holding the XLR to the plate Remove the XLR...
Page 5
DIS Digital Conference System User Manual Turn over the XLR. Undo and remove the two T8 torx screws and the 3mm Alan bolt Separate the connector section from the XLR chassis...
Page 6
DIS Digital Conference System User Manual Remove the plastic “lock” insert...
Page 7
DIS Digital Conference System User Manual Put the XLR chassis back onto the front plate Fasten the XLR chassis to the from plate with the 3 M3 nuts. Now insert the boundary mic into the sleeve of the XLR chassis and then tighten the 3 Allen screws on the bottom of the mic;...
DIS Digital Conference System User Manual Refer to Setup section for information in how to setup the system using the above menus. Technical Specifications Electrical Transducer type ..Permanently polarized condenser Polar pattern ..Omnidirectional, 360° pickup angle Frequency response ......40 Hz - 18 kHz Sensitivity ....
Page 9
DIS Digital Conference System User Manual United States, Canada, Latin Europe, Middle East, Africa: Asia, Pacific: America, Caribbean: Shure Incorporated Shure Europe Gmbh Shure Asia Limited 22/F, 625 King's Road 5800 West Touhy Avenue Jakob-Dieffenbacher-Str. 12 North Point, Island East, 75031 Eppingen...