The Clock - Rangemaster Classic 110 Gas User's Manual & Installation Instructions

Range cooker
Hide thumbs Also See for Classic 110 Gas:
Table of Contents

Advertisement

Fig.2.25
ArtNo.302-0002 - 6BC annotated
A
B
C
A – Minute minder, B – 'Cook' time, C – 'Stop' time, D – Manual,
E & F – Time setting buttons
Fig.2.26
ArtNo.302-0001 - 6-button clock
Fig.2.27
ArtNo.302-0003 - 6BC
minute minder setting 1
Fig.2.29
ArtNo.302-0005 -
6BC Stopping the oven 1
Fig.2.31
ArtNo.302-0006 - 6BC
setting the cook time
Fig.2.33
ArtNo.302-0005 -
6BC Stopping the oven 1
D
E
F
Fig.2.28
ArtNo.302-0004 -
Minute minder setting 2
Fig.2.30
ArtNo.302-0005a -
6BC Stopping the oven 1a
Fig.2.32
ArtNo.302-0006 - 6BC
setting the cook time
Fig.2.34
ArtNo.302-0005a -
6BC Stopping the oven 1a

The Clock

You can use the timer to turn the ovens on and off. The clock
must be set to the time of day before the ovens will work.
Setting the Time of Day
The 6-button LCD clock is shown in
first connected the display flashes ( 0.00 ) and (G) alternately.
Press and hold both the [C] and [D] buttons down
1.
(
). Now press the [+] button (or the [–] button)
Fig.2.26
until the correct time shows.
Do not forget that it is a 24-hour clock.
2.
If you need to reset the cooker, turn off the power supply
3.
and wait for a couple of minutes and start again.
Setting the Minute Minder
Press and hold the [C] button (
1.
the [+] button until the length of time you want to cook
for is shown (
Fig.2.28
You can check the time remaining by pressing [C]. When
2.
the beeper sounds cancel it by pressing [C].
The 'cook period', which is the length of time you
want the oven to cook for.
The 'stop time', which is the time of day you want the
oven to stop cooking.
To Stop the Ovens Automatically
Press and hold the 'stop time' [E] button (
1.
then press the [+] button (or [–] button) until the required
'stop time' shows (
Once the 'stop time' is reached, the beeper sounds.
2.
To stop the beep turn the oven control knob to 0 first and
3.
then press [ B ] once; press [ B ] again to return to manual
cooking.
To Start and Stop the Ovens Automatically
Before you set the clock you must have two numbers
1.
clearly in mind – the 'cook period' and the 'stop time'.
Note: You cannot set a start time directly – this is set
automatically by setting the 'cook period' and the 'stop time'.
Press and hold the [D] button (
2.
the [+] button (or [–] button) until the required 'cook
period' shows (
Fig.2.32
Now press and hold the [E] button (
3.
press the [+] button (or [–] button) until the required 'stop
time' shows (
Fig.2.34
AUTO will now show in the display.
4.
Set the oven(s) to the required temperature. When
5.
cooking is finished the beeper will sound. Turn the oven
knob to the OFF position first, and then press the [ B ]
button once to stop the beep; press it again to return to
manual cooking.
If you are out, do not worry about the beeper going off, it
6.
stops after a while. When you return, turn the oven knob
10
. When the clock is
Fig.2.25
), and then press
Fig.2.27
).
Fig.2.29
). AUTO will show in the display.
Fig.2.30
) and then press
Fig.2.31
).
Fig.2.33
). Release the buttons.
) and
) and then

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents