Clock Settings - Lumiscope AccuRead 1134 User Manual

20
1. To set time and date
A. Press the " " button and hold for at least 5 seconds. You
can start setting the year when the "YEAR" digit blinks.
B. Then press " MEMO " to increase the year and
" PAGE
" to decrease the year.
C. After finishing "YEAR" setting, press "
Now you can adjust Month/Date/Hour and Minute
digits as you desire.
2. How to set Alarm Clock
A. Press " " button and hold for at least 5 seconds. The
"YEAR" digit blinks. At this point, adjust the Date/Time
accordingly.
B. The LCD display blinks the word "ON". You may press
" " and adjust desired time for the alarm by pressing
the " MEMO" or "PAGE" buttons.
C. Keep LCD display in the "ON" position, and press "
button to continue second alarm setting.
D. If you need to stop alarm setting, you may press.
" MEMO" or "PAGE" buttons to let the LCD display transfer
to the "OFF" position. Then the Alarm setting will stop.

Clock Settings

" button again.
"
Clock Settings
E. During the setting, if there is any confusion you may
simply press the " " button and this unit will re-
display TIMER function.
F . This unit offers 4-Alarm setting. Each alarm will ring for
45 seconds, or you may stop the alarm by pressing the
" " button.
21