Aiphone IS-SS-2RA Instruction Manual

The IS-SS-2RA is a stainless steel flush mount door station with standard and emergency call
buttons. The unit is equipped with ADA compliant lettering and Braille signage for both the
standard and emergency buttons. A call status indicator is included to meet ADA rescue assistance
requirements. The IS-SS-2RA must be programmed as a video door station and must connect to the
IS-CCU or IS-SCU control units.
IS-SS-2RA
6
7
PACKAGE CONTENTS:
4-pin connector
STEADY GREEN INDICATES CALL ANSWERED CALL
EMERGENCY
IS-SS-2RA
Vandal-resistant Door Station
Blank name
placard
IS-SS-2RA
Stainless Steel Flush Mount Door Station with
Standard & Emergency Call Buttons
1
2
3
4
5
Security Driver
2-pin connector
for CCTV for external reset
Semi-flush backbox &
tamper-resistant screws
-INSTRUCTIONS-
NAMES & FUNCTIONS:
1. Microphone
2. Speaker
3. Name Placard
4. Call status indicator
FEATURES:
• Audio communication with calling area
• Two call buttons: Standard and Emergency
• ADA compliant lettering and Braille signage
• LED call status indicator
• CCTV input (Analog NTSC 1Vpp)
• Red mushroom button for emergency call
• Two programmable relay outputs for
activation of external systems/devices
• Name placard
• Stainless steel faceplate with tamper
resistant screws
INSTALLATION:
• For flush mounting, cut a hole in the wall and
use supplied back box.
Box dimensions are:
11-1/16" H x 5-7/8" W x 1-3/4" D
• For surface mounting, use the SBX-ISDVFRA
surface mount box. This box can mount to a
standard 1-gang box or to any flat surface.
5. Signage with Braille
6. Call button
7. Emergency button
Pg.1