Table of Contents
Advertisement
DO NOT REMOVE THIS LABEL
Listed Solid Fuel Burning Appliance
Suitable for use in masonry fireplaces.
NER-QA219, TL-116
MODEL:
FREEDOM BAY
(FLUSH BAY-96
Tested to: UL-1482/UL-907
PREVENT HOUSE FIRES - Install and use only in accordance with the
manufacturer's installation and operating instructions. Contact your local
building or fire officials about restrictions and installation inspection in your
area. Refer to local building codes and manufacturer's instructions for
precautions required for passing a chimney through a combustible wall or
ceiling. Do not run a chimney connector through a combustible wall or ceiling.
Do not connect this unit to a chimney flue serving another appliance.
Clearances may be reduced by methods specified in NFPA 211, listed wall
shields, pipe shields, or other means approved by local building or fire officials.
Minimum Clearances
to Combustible Materials
Fireplace Insert Installation
Freedom Bay
K.
Mantle
with Mantle Shield
L.
Top Facing
with Shield
M.
Adjacent Sidewall
N.
Side Facing
COMPONENTS REQUIRED FOR MASONRY FIREPLACE INSTALLATION:
Surround Panels.
Direct flue connection is optional. Do not remove bricks or mortar from
masonry fireplace.
Note: Replace glass with 5mm neoceramic or ceramic glass only.
For use with solid wood fuels only. Operate only with feed door closed - open to
feed fire only. Do not use a grate or elevate fire - build fire directly on the hearth.
Manufactured By:
U.S. ENVIRONMENTAL PROTECTION AGENCY
Certified to comply with July 1990 particulate emission standards.
2004 2005 2006 Jan. Feb. Mar. Apr. May June July Aug. Sept. Oct. Nov. Dec.
DO NOT REMOVE THIS LABEL
SERIAL
NUMBER
)
Report No. 6009 (May 1994)
Insert Clearance Diagram
32.0 in.
M
19.0 in.
30.0 in.
8
17.0 in.
HEARTH
15.0 in.
Front 16.0 in.
13.5 in.
Sides 08.0 in.
4800 Harbour Pointe Blvd. SW Mukilteo,
Date of Manufacture
Made in U.S.A.
MANTEL
K
L
N
INSERT
16
EXTENSION
IGN 0228
Advertisement
Table of Contents
