Setup > Ddns - Linksys WRT54GL User Manual

Wireless-g broadband router
Hide thumbs Also See for WRT54GL:
Table of Contents

Advertisement

Chapter3
Network Setup
The Network Setup section changes the settings on the
network connected to the Router's Ethernet ports . Wireless
Setup is performed through the Wireless tab .
Router IP
This presents both the Router's IP Address and Subnet
Mask as seen by your network .
Router IP Address
Network Address Server Settings (DHCP)
The settings allow you to configure the Router's Dynamic
Host Configuration Protocol (DHCP) server function . The
Router can be used as a DHCP server for your network . A
DHCP server automatically assigns an IP address to each
computer on your network . If you choose to enable the
Router's DHCP server option, make sure there is no other
DHCP server on your network .
Network Address Server Settings (DHCP)
DHCP Server
DHCP is enabled by factory default . If you
already have a DHCP server on your network, or you don't
want a DHCP server, then select Dsable (no other DHCP
features will be available) .
Startng IP Address
Enter a value for the DHCP server to
start with when issuing IP addresses . Because the Router's
default IP address is 192 .168 .1 .1, the Starting IP Address must
be 192 .168 .1 .2 or greater, but smaller than 192 .168 .1 .253 .
The default Starting IP Address is 9.68..00 .
Maxmum Number of DHCP Users
number of PCs that you want the DHCP server to assign
IP addresses to . This number cannot be greater than 253 .
The default is 0 .
Clent Lease Tme
The Client Lease Time is the amount
of time a network user will be allowed connection to the
Router with their current dynamic IP address . Enter the
amount of time, in minutes, that the user will be "leased"
this dynamic IP address . After the time is up, the user will
be automatically assigned a new dynamic IP address . The
default is 0 minutes, which means one day .
Wreless-G Broadband Router
Enter the maximum
Advanced Configuration
Statc DNS (-3)
The Domain Name System (DNS) is how
the Internet translates domain or website names into
Internet addresses or URLs . Your ISP will provide you with at
least one DNS Server IP Address . If you wish to use another,
enter that IP Address in one of these fields . You can enter up
to three DNS Server IP Addresses here . The Router will use
these for quicker access to functioning DNS servers .
WINS
The Windows Internet Naming Service (WINS)
manages each PC's interaction with the Internet . If you
use a WINS server, enter that server's IP Address here .
Otherwise, leave this blank .
Time Setting
Select the time zone in which your network functions
from this drop-down menu . (You can even automatically
adjust for daylight saving time .)
Time Setting
Click Save Settngs to apply your changes, or click Cancel
Changes to cancel your changes .
Setup > DDNS
The Router offers a Dynamic Domain Name System (DDNS)
feature . DDNS lets you assign a fixed host and domain
name to a dynamic Internet IP address . It is useful when
you are hosting your own website, FTP server, or other
server behind the Router .
Before you can use this feature, you need to sign
up for DDNS service with a DDNS service provider,
www .dyndns .org or www .TZO .com . If you do not want to
use this feature, keep the default setting, Dsable .
DDNS
DDNS Service
If your DDNS service is provided by DynDNS .org, then
select DynDNS.org from the drop-down menu . If your
DDNS service is provided by TZO, then select TZO.com .
The features available on the DDNS screen will vary,
depending on which DDNS service provider you use .


Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents