Download Print this page
DeLonghi DCH7093ER User Manual

DeLonghi DCH7093ER User Manual

Ceramic fan heater

Advertisement

IntroductIon
Thank you for choosing a De'Longhi product.
Please take a few minutes to read these instructions.
This will avoid all risks and damage to the appliance.
Important safeguards
-
Do not use the appliance near showers, bathtubs, sinks,
swimming pools, etc.
-
Always use the appliance in an upright position.
-
Do not use the appliance to dry laundry. Do not obstruct
the air intake and outlet grilles (danger of overhea-
ting).
-
The appliance is not intended for use by persons (inclu-
ding children) with reduced physical, sensory or men-
tal capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety. Children should be supervised to ensure
that they do not play with the appliance.
-
The heater must be positioned at least 50 cm from furni-
ture or other objects.
-
Do not use the appliance near walls, furniture, curtains,
etc.
-
The use of extension leads is not recommended.
However if they cannot be avoided, follow the instruc-
tions accompanying the extension lead and never exce-
ed the power limit marked on the extension.
-
If the power cable is damaged, it must be replaced by
the manufacturer, an authorised service centre or a qua-
lified electrician in order to eliminate all risk.
-
The appliance must not be placed immediately under a
fixed power socket.
-
Do not use the appliance in rooms with a floor area of
2
less than 4m
.
-
Before putting the appliance away, make sure it is com-
pletely off and unplugged from the mains socket. Wrap
the cable around the base. Do not store in dusty atmos-
pheres.
-
Room temperature should be between 0 and 30° C.
-
Do not rest anything on the appliance.
-
To avoid the safety system resetting accidentally, this
appliance must not be powered through an external on/
off device such as a timer, or connected to a circuit which
is turned off and on regularly by the energy supplier.
Important safeguards
Important: To avoid overheating, never under
any circumstances cover the appliance during
operation as this would lead to a dangerous rise in
temperature.
safety functions
safety device: the appliance is fitted with a safety
-
device which switches it off in the event of accidental
overheating (e.g. obstruction of air intake and outlet
grilles, motor turning slowly or not at all).
To reset, unplug the appliance from the mains socket for
a few minutes, remove the cause of overheating then
plug in again.
-
tip over safety device: a tip over safety device turns
the appliance off if it falls over or is positioned inappro-
priately in such a way as to jeopardise safety.
The appliance emits a beep and a dot flashes on the di-
splay. The appliance resumes operation a few seconds
after being placed in an upright position again.
disposing of the appliance
In compliance with European directive 2002/96/EC,
the appliance must not be disposed of with house-
hold waste, but taken to an authorised waste separa-
tion and recycling centre.
7
en

Advertisement

loading

Summary of Contents for DeLonghi DCH7093ER

  • Page 1 Important safeguards IntroductIon Important: To avoid overheating, never under Thank you for choosing a De’Longhi product. any circumstances cover the appliance during Please take a few minutes to read these instructions. operation as this would lead to a dangerous rise in This will avoid all risks and damage to the appliance.
  • Page 2: Operation And Use

    description/use descrIptIon 5.2 freeze prevention (see fig. 1) In this mode, the appliance keeps the room at a temperature ON/STAND-BY button of 7°C to avoid freezing. +/- adjustment buttons MODE button (selects the operating mode) 5.3 Heating 1, 2 and Heating 3 “ECO plus”...
  • Page 3: Troubleshooting

    trouBLesHootIng is reached, the appliance comes on with the settings used If the appliance displays “PF” and emits a beep, the tempera- during the previous period of operation. ture sensor is malfunctioning. auto-off: with the appliance on, press the timer button If the problem continues, contact customer services.